Jump to content


Photo

3rd Annual Mnsbw


157 replies to this topic

#51 Secret Assassin

Secret Assassin

    Member

  • Members
  • 119 posts

Posted 08 February 2009 - 08:54 PM

I am good for either of those dates but I prefer the 28th.

Has there been any word from Bullet Dragon or Something Assassin on their attendance?
(I have impending deals with both)


On the season of foam stuff; wondering if the current field is big enough...

I'll be there. I know your buying two things from me for $5. Can you remind me what those two things are?
  • 0

#52 atomatron

atomatron

    Member

  • Members
  • 579 posts

Posted 08 February 2009 - 09:25 PM

Stock 1st gen Mav and a Vulcan chain.

Tators- "Goldfinger"

Edited by atomatron, 08 February 2009 - 09:28 PM.

  • 0
Perche Germolgi. [Because it shoots]

Rainbow Clan

#53 Daniel Beaver

Daniel Beaver

    HQRSE CQCK

  • Moderators
  • 2,096 posts

Posted 09 February 2009 - 12:54 AM

Oh yeah, I have to bring a bunch of stuff for people. I have that all organized, so I no need to remind me. Venom, was it you who had the extra +bow spring? I'd be interested in buying that.
  • 0

#54 Secret Assassin

Secret Assassin

    Member

  • Members
  • 119 posts

Posted 09 February 2009 - 05:18 PM

Oh yeah, I have to bring a bunch of stuff for people. I have that all organized, so I no need to remind me. Venom, was it you who had the extra +bow spring? I'd be interested in buying that.

Extra? Hes got like 5.
  • 0

#55 venom213

venom213

    Member

  • Validating
  • 1,294 posts

Posted 09 February 2009 - 05:48 PM

I can post for myself. I actually have 4, I sold one to Julian. I'm not sure if I'll be willing to sell any, because I'm using two of them for SNAPs. I'm cutting one in half to use for BBBs/Longshots, and I'm probably using the fourth one for TTGs, because it's the only strong spring that I have found fits in the plunger tube. If your building a SNAP, you should do what myself and Julian do, use 3 ACE #49 springs stacked on each other. I thought of the idea, but Julian rarely gives me credit for it.

Edited by venom213, 09 February 2009 - 05:48 PM.

  • 0

#56 BustaNinja

BustaNinja

    Member

  • Members
  • 1,916 posts

Posted 09 February 2009 - 06:37 PM

I can post for myself. I actually have 4, I sold one to Julian. I'm not sure if I'll be willing to sell any, because I'm using two of them for SNAPs. I'm cutting one in half to use for BBBs/Longshots, and I'm probably using the fourth one for TTGs, because it's the only strong spring that I have found fits in the plunger tube. If your building a SNAP, you should do what myself and Julian do, use 3 ACE #49 springs stacked on each other. I thought of the idea, but Julian rarely gives me credit for it.

Actually every time people ask or say "thats a good idea" I give you credit, so stop your bitching you suburban butt bandit :)

Anyway, CrossSNAP is leaner, meaner and even scarier then before. Expect ownage.
  • 0
Me: Yeah. he beat a hooker
Venom: Haven't we all?

#57 Secret Assassin

Secret Assassin

    Member

  • Members
  • 119 posts

Posted 09 February 2009 - 10:46 PM

I can post for myself. I actually have 4, I sold one to Julian. I'm not sure if I'll be willing to sell any, because I'm using two of them for SNAPs. I'm cutting one in half to use for BBBs/Longshots, and I'm probably using the fourth one for TTGs, because it's the only strong spring that I have found fits in the plunger tube. If your building a SNAP, you should do what myself and Julian do, use 3 ACE #49 springs stacked on each other. I thought of the idea, but Julian rarely gives me credit for it.

Actually every time people ask or say "thats a good idea" I give you credit, so stop your bitching you suburban butt bandit :)

Anyway, CrossSNAP is leaner, meaner and even scarier then before. Expect ownage.

I will also have my crosssnap(thanks to juliano) too so watch out.
  • 0

#58 killer nerf

killer nerf

    Member

  • Members
  • 9 posts

Posted 10 February 2009 - 08:10 PM

hey guys i dont have a nice primary ready so any1 wanna sell me any modded primary? :)
  • 0

#59 Daniel Beaver

Daniel Beaver

    HQRSE CQCK

  • Moderators
  • 2,096 posts

Posted 10 February 2009 - 09:32 PM

hey guys i dont have a nice primary ready so any1 wanna sell me any modded primary? :w00t:

I have some you can try out. Also, use proper grammer and spelling here; this community has strict standards regarding that.
  • 0

#60 Nerf Bros

Nerf Bros

    Member

  • Members
  • 309 posts

Posted 11 February 2009 - 04:10 PM

Still have to convince parents to let us go, but we think we can get there.
Working on a WTB/WTS/WTT list for this war, so far goes like this:
WTB:
longshots, no clips or fg necessary
LSFGs- want to try the integration again
LS clips
(Could wrap them together, but would also take separately)
"Junk" guns- if you don't want it we'll take it cheap. Impulse purchases of good deals may also occur.
WTS or Trade:
A hornet that I can't get open
Maverick (It's first gen!) ((Yes, I know this is nothing to get excited about)
Thats it for now.
PM us with offers.
  • 0
We have no sig.

#61 killer nerf

killer nerf

    Member

  • Members
  • 9 posts

Posted 11 February 2009 - 10:36 PM

:lol: :angry: hey sorry guys now that the date is changed i cant go to the war -_- -_-
  • 0

#62 venom213

venom213

    Member

  • Validating
  • 1,294 posts

Posted 14 February 2009 - 09:06 PM

Does anybody have an Electric Eel clip? I got an EE at goodwill today, but it didn't have any clips, so I was disappointed. I'll buy/trade for one.
  • 0

#63 BustaNinja

BustaNinja

    Member

  • Members
  • 1,916 posts

Posted 15 February 2009 - 12:27 AM

I finished the SNAP I was building for Secret Assassin, and let me tell you, its a beast. It kicks like a mule, and its really fun to shoot. I actually want to keep it for myself, its that good (in my opinion. Its kinda small though, so it kinda forces some rushing)

This war will be about the home mades. You better rock Team SNAP Venom. I will mock you if yours breaks again
  • 0
Me: Yeah. he beat a hooker
Venom: Haven't we all?

#64 venom213

venom213

    Member

  • Validating
  • 1,294 posts

Posted 15 February 2009 - 06:44 PM

Daniel beaver and I are planning on ordering a large quantity of Mile High Black FBR, which fits really well in PETG and 9/16ths brass. We are trying to get at least two other people to divide the order. If we have 4 people order 800' of foam, each person would get 200 feet and would only have to pay a bit more than $10 each. Who's interested?

Edited by venom213, 15 February 2009 - 06:45 PM.

  • 0

#65 Daniel Beaver

Daniel Beaver

    HQRSE CQCK

  • Moderators
  • 2,096 posts

Posted 15 February 2009 - 09:50 PM

If any of you need to test that foam out, you may have picked up some of my darts at highland park. They are black with white felt tips. If you can make it out to the park itself, there are still a few laying around from January; I picked some up last week and they still shoot great even after sitting in the snow for a month.

Here's a link to hereticorp's sales page for more information. It's quite a bit wider than the foam that a lot of you use; as hereticorp says:

The foam fits:

Thick Wall PETG - Perfect tight fit
9/16" Brass - Nice fit, tiny bit loose
17/32" Brass - Very tight fit, probably won't work without a little stretching
CPVC - Tight fit, might need stretching for a good fit
SCH 80 PVC - Perfect Fit.

I've been getting very good results using PETG and 9/16 in airguns. Using felt/washer darts, I have compared it the foam blacksunshine uses (which is similar in diameter), SwiFTNerF's white foam (which is quite a bit smaller in diameter), the local Ace hardware stuff (which is slightly smaller), and the local home depot stuff (which is also slightly smaller). This stuff is consistently neck-in-neck with blacksunshine's foam, and outperforms the others. Preliminary tests suggest that it shoudl work well in springers using 9/16 brass with tightening rings, but I need to test it more.

Some caveats:
It is very tight in CPVC, to the point that it is hard to get the darts in all the way. I'm actually making a PVC coupled NF so that I can put a brass barrel on it, since it is so hard to get the darts in. Ditto for 17/32" brass, although it may work well as a base for a telescoping barrel. You will not be able to blow them down a PETG barrel, you have to use a ramrod.

Fun fact: this foam shrinks imperceptibly in very cold weather, so they are good winter darts.

Pricing info: if 4 people buy, it will be $12.75 total (shipping included) for 200' each. If you only want a smaller portion, I would tentatively price it at $6.50 per 100'.

Edited by Daniel Beaver, 15 February 2009 - 09:54 PM.

  • 0

#66 venom213

venom213

    Member

  • Validating
  • 1,294 posts

Posted 15 February 2009 - 10:17 PM

Thanks for the descriptions Beaver. I know that I personally will be set for 200', probably not anymore than that. I'm hoping we will be able to find more people to order this foam. The savings will be amazing. If you can access thinwall CPVC, which is similar in ID to 17/32 Brass, this foam should be a tight, but usable fit in that.

Edited by venom213, 15 February 2009 - 10:19 PM.

  • 0

#67 Daniel Beaver

Daniel Beaver

    HQRSE CQCK

  • Moderators
  • 2,096 posts

Posted 15 February 2009 - 11:57 PM

This thread is getting derailed...

Anyone know where to get SCH 80 PVC in the cities? I have only been able to find SCH 40. Also, thinwalled cpvc can be found at the Quarry Home Depot, and at the Ace hardware on Grand Ave. Methinks we need a thread for modding supplies in the Twin Cities.
  • 0

#68 koree

koree

    Member

  • Members
  • 311 posts

Posted 15 February 2009 - 11:59 PM

i'll split the price for the foam for a share of it.

Koree
  • 0

#69 venom213

venom213

    Member

  • Validating
  • 1,294 posts

Posted 16 February 2009 - 12:32 AM

This thread is getting derailed...

Anyone know where to get SCH 80 PVC in the cities? I have only been able to find SCH 40. Also, thinwalled cpvc can be found at the Quarry Home Depot, and at the Ace hardware on Grand Ave. Methinks we need a thread for modding supplies in the Twin Cities.

I have found SCH 80 at Menards and Ace here in Apple Valley, but I have never bought any. Funny you mention ace on Grand Ave. because that's where I've specifically been getting my thinwall CPVC ever since the Ace in Apple Valley stopped stocking it. It's right near where my friend Cashew lives. I found it by accident when we were walking to Walgreens or something during the summer. I thought I was all cool because Sam said that the Ace on Grand didn't carry CPVC, but then I went there and bought some. But there are two Aces on Grand. It seems like everyone is going to that same ACE. I told BustaNinja that they have thinwall a while ago, and I told Secret Assassin (who said he was going to go there soon).
  • 0

#70 Daniel Beaver

Daniel Beaver

    HQRSE CQCK

  • Moderators
  • 2,096 posts

Posted 16 February 2009 - 01:08 AM

That's the ACE with brass, the only place I know of in the cities which has it. koree, I have you down as interested in 100'.

Posted Image

Edited by Daniel Beaver, 16 February 2009 - 01:13 AM.

  • 0

#71 NerfCrazy

NerfCrazy

    Member

  • Members
  • 497 posts

Posted 17 February 2009 - 09:10 PM

Sorry guys I've been gone for a while and have been missing nerf for a while but I have been busy with lots of things (one of which is in my signature). I will attend and have already marked it on my calendar so my parents can't say no. Venom, I do have an EE clip and a razorbeast I'm too lazy to mod it. :lol:

Edited by NerfCrazy, 17 February 2009 - 09:12 PM.

  • 0

#72 venom213

venom213

    Member

  • Validating
  • 1,294 posts

Posted 18 February 2009 - 09:49 PM

Okay, something fairly big is happening. Since Secret Assassin wanted to get his Snap from BustaNinja before MNSBW, we decided to have a little meeting in BustaNinja's neighborhood. I know this is terribly last minute, it was just intinded as a little mini war for the 3 of us, but I decided to make it open because I want to sell some stuff before MNSBW, and it will be a nice little tune-up. So here's the deal for the MINI war:

Date: This Saturday, February 21st
Location: Newell Park, St. Paul
Time: 11-2 or 3ish, play it by ear

I beleive the address is:
900 N. Fairview Ave.
Saint Paul, MN 55104

I don't really expect much of turn out for this because it is so last minute. But, if your free, and have enough time to whip up some stefans and throw together some guns, you should consider coming. I'm particularily interested in Beaver and Atomatron coming so we can do our trades.

So who's interested?

Edited by venom213, 18 February 2009 - 11:22 PM.

  • 0

#73 koree

koree

    Member

  • Members
  • 311 posts

Posted 19 February 2009 - 12:42 AM

I'll see you there on saturday.

Koree

I'd also like to add that just a few blocks away that evening, we are having one of our weekly nerf wars at Hamline at 7'oclock. It's an indoor setting in a relatively large area. If anyone is interested let me know.

Edited by koree, 19 February 2009 - 12:44 AM.

  • 0

#74 Daniel Beaver

Daniel Beaver

    HQRSE CQCK

  • Moderators
  • 2,096 posts

Posted 19 February 2009 - 01:10 AM

I think I can pop in for a little bit on Saturday - that's very close to where I live.

venom and Busta: Do you want me to bring any of the guns I sold to you?

There are nerf wars at hamline every week? How did I not know about this?
  • 0

#75 koree

koree

    Member

  • Members
  • 311 posts

Posted 19 February 2009 - 01:34 AM

I think I can pop in for a little bit on Saturday - that's very close to where I live.

venom and Busta: Do you want me to bring any of the guns I sold to you?

There are nerf wars at hamline every week? How did I not know about this?



Hmm, perhaps its time i reached out to the non hamline students. -_- I'll talk to you about it on saturday.
  • 0


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users