Angel Breech Question
Started by umpshaplapa, Jan 19 2009 06:35 PM
3 replies to this topic
#2
Posted 19 January 2009 - 06:43 PM
Yes, you do. If you are following Hereticorp's method (which I reccomend, It's easier to follow than FA_24's, no offence), you need to sand down the inside of the bolt enough to fit the 19/32 all the way to the back.
Hope this helps.
Hope this helps.
It's just screaming to be rearloading...
I seen a movie about that once.
#4
Posted 19 January 2009 - 11:06 PM
This is where the breech differs from FA24's breech, his has you putting 9/16 through and then adding the 19/32 on top.
Take the black piece you dremeled the AR out of and use a dremel or drill to widen the opening enough to fit a piece of 19/32" brass through. Slide the 12" piece through until it's even with the back of the plastic, and then go to town with the hot glue, filling in all the space around the brass.
I got a little over enthusiastic with the glue and had to trim it back a little.
From my writeup The New HeretiCorp Assault Rifle
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users