#1
Posted 18 January 2009 - 05:23 PM
#2
Posted 18 January 2009 - 05:25 PM
#3
Posted 18 January 2009 - 05:31 PM
However, I'll answer your question too. Copper and Brass are very different. First, all Nerf micros, homemade or not, hover around the 1/2" diameter mark. 1/2" copper has an ID that is slightly too large for the great variety of darts. The reason that people use brass is because it comes in a variety of sizes - 1/2, 17/32, 9/16, etc. They can then find a size that fits their darts. Most people use 17/32 or 9/16.
All foam is different, and you need to find a barrel size that fits it. Do some research, try things on your own. The short answer is, figure it out yourself. You're the only person who has your darts, so you're the only person who can find your perfect dart/barrel combo.
#4
Posted 18 January 2009 - 05:33 PM
This has been discussed at length and every thread ends up with the same outcome.
Copper is expensive.
Copper doesn't come in as wide of a variety of sizes.
Copper pipe is even softer than brass tubing.
Brass is used by many because it comes in such minutely incremental sizes, and each size can be nested in other sizes.
The following will always be true: USE THE BARREL MATERIAL THAT FITS THE HOMEMADE DARTS YOU INTEND TO USE. That's all there is to it.
Quit asking people what will work with what because nobody can tell you that with 100% accuracy.
#5
Posted 18 January 2009 - 05:58 PM
They aren't the same thing. A penny is actually worth about three cents in copper, copper is expensive.
(Unofficial) Wii thread
Damn it Foamfoot. Why is it that you kill every good topic with a retarded response a few days late.
#6
Posted 18 January 2009 - 06:13 PM
Oh fuck, another nerfer# member...
They aren't the same thing. A penny is actually worth about three cents in copper, copper is expensive.
Aren't pennies just coated in copper nowadays? And that coating cost 3 cents per penny? Shit. Or are you referring to older pennies?
#7
Posted 18 January 2009 - 09:55 PM
Aren't pennies just coated in copper nowadays? And that coating cost 3 cents per penny? Shit. Or are you referring to older pennies?
Yep, modern pennies are zinc with a copper electroplating. I don't think its worth all that much though. Older pennies are worth more, melted down.
You'll do a lot better if you spread the lips with the front. Trying to wriggle the back in there first seems a bit counterintuitive.
RSCBow
#8
Posted 18 January 2009 - 10:28 PM
#9
Posted 19 January 2009 - 12:19 AM
"i gots da good grammers"
"the only thing we have to fear is if the ninjas are coming!"
"mr. macho super-hero serial killer lemur-bear."
i am ninja-pwner
#10
Posted 19 January 2009 - 03:36 PM
#11
Posted 19 January 2009 - 06:54 PM
#12
Posted 19 January 2009 - 07:25 PM
I'm pretty sure that pennies from 1982 and before are made of almost 100% copper. I'm also pretty sure that it is illegal to melt down money.
Bronze, actually. They have gone through various iterations, however. And yes, it is now illegal to destroy money for the express purpose of selling the material it is made of.
[15:51] <+Rhadamanthys> titties
[15:51] <+jakejagan> titties
[15:51] <+Lucian> boobs
[15:51] <+Gears> titties
[15:51] <@Draconis> Titties.
[15:52] <+Noodle> why is this so hard?
#13
Posted 19 January 2009 - 10:09 PM
I'm pretty sure that pennies from 1982 and before are made of almost 100% copper. I'm also pretty sure that it is illegal to melt down money.
Bronze, actually. They have gone through various iterations, however. And yes, it is now illegal to destroy money for the express purpose of selling the material it is made of.
Not to seem like an ass, but it actually is copper. Well, actually about 95% copper and about 5% zinc for pre-1982 pennies. Source
Also, The Guide To Barrel Material has some information on copper barrels.
Edited by cheesypiza001, 19 January 2009 - 10:19 PM.
#14
Posted 20 January 2009 - 01:07 AM
-These days, because of the energy crisis, if Santa gave me coal, I'd be
I'd go emo if there wasn't nerf. - DarkShrimp
#15
Posted 20 January 2009 - 03:33 PM
I'm pretty sure that pennies from 1982 and before are made of almost 100% copper. I'm also pretty sure that it is illegal to melt down money.
Bronze, actually. They have gone through various iterations, however. And yes, it is now illegal to destroy money for the express purpose of selling the material it is made of.
Not to seem like an ass, but it actually is copper. Well, actually about 95% copper and about 5% zinc for pre-1982 pennies. Source
Also, The Guide To Barrel Material has some information on copper barrels.
Well, you are still an ass, as you are not entirely correct. Nor was I , however. Read the Wikipedia article to confirm. Bronze and Brass are both alloys of copper. I was correct in stating that pennies were made of an alloy, I merely mixed up my iterations and thought that the pre-'82 units were bronze. They are in fact brass. Yes, you were correct in stating the percentages of the alloy, but you are very naive not to understand that those numbers make it an ALLOY, not an ELEMENT. Take a chemistry class.
[15:51] <+Rhadamanthys> titties
[15:51] <+jakejagan> titties
[15:51] <+Lucian> boobs
[15:51] <+Gears> titties
[15:51] <@Draconis> Titties.
[15:52] <+Noodle> why is this so hard?
#16
Posted 20 January 2009 - 06:57 PM
I'm pretty sure that pennies from 1982 and before are made of almost 100% copper. I'm also pretty sure that it is illegal to melt down money.
Bronze, actually. They have gone through various iterations, however. And yes, it is now illegal to destroy money for the express purpose of selling the material it is made of.
Not to seem like an ass, but it actually is copper. Well, actually about 95% copper and about 5% zinc for pre-1982 pennies. Source
Also, The Guide To Barrel Material has some information on copper barrels.
Well, you are still an ass, as you are not entirely correct. Nor was I , however. Read the Wikipedia article to confirm. Bronze and Brass are both alloys of copper. I was correct in stating that pennies were made of an alloy, I merely mixed up my iterations and thought that the pre-'82 units were bronze. They are in fact brass. Yes, you were correct in stating the percentages of the alloy, but you are very naive not to understand that those numbers make it an ALLOY, not an ELEMENT. Take a chemistry class.
Ah, I see. I guess I was still being an ass. Sorry.
Edited by cheesypiza001, 20 January 2009 - 06:58 PM.
#17
Posted 20 January 2009 - 09:30 PM
Edited by nerfer63, 20 January 2009 - 10:36 PM.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users