These are templates for the spacers I have lately been using for my turreted nite finders. Whenever I wanted to make one, I would need to get out the compass, make a sketch, etc. So I made these with a geometry program. They are the right size to just print off and use.
These templates are meant to be used with cpvc. I use a 5/8" forstner bit to drill the holes.
8 barrel version
![Posted Image](http://i218.photobucket.com/albums/cc26/bobafan87/pattern2.jpg)
6 barrel version
![Posted Image](http://i218.photobucket.com/albums/cc26/bobafan87/pattern.jpg)
When you finish, it should be something like this.
![Posted Image](http://i218.photobucket.com/albums/cc26/bobafan87/Picture002.jpg)
I can make templates for different numbers of barrels if there is a demand.
thaygor: all i remimber is pumping it hard and shooting than trying to pump again
---
<death09>my girlfriend broke up with me and sent me pix of her and her new boyfriend in bed
<ktp753>ouch.
<death09>yeah.i sent them to her dad