Jump to content


Photo

Sf Help

Damn leak...

10 replies to this topic

#1 AJZ

AJZ

    Member

  • Members
  • 366 posts

Posted 08 January 2009 - 07:35 PM

I recently purchased a SF and we all know they're leaky.

I remember a couple SF help threads, but I suck at searching. If there are in fact SF threads, please direct me to them.

On to the problem: It came leaky so I do not know what happened to it before I bought it. I'm assuming the pump is plugged since I can pump it over 5 times. The main problem is the left barrel when peering into the front immediately lets the air out when I release the force applied to the pump. In other words, I pump it and it leaks when I try to pump it again. The right barrel seems to work fine because it creates a nice pop when fired. I have not done anything to it besides pump it a few times to observe the leak. I'm guessing the valve in the front of the chamber is somehow out of line and it opens prematurely.

THanks for any help, Alec

Does anyone else recomend nerfer9's solution?

Edited by AJ.Z, 08 January 2009 - 08:12 PM.

  • 0

#2 nerfer9

nerfer9

    Member

  • Members
  • 680 posts

Posted 08 January 2009 - 07:57 PM

Get some silicone spray, pull the trigger, spray into BOTH barrels (to prevent leaks in the other one), point at the ground, and pump. Leave to sit for 24-48 hours andsee if the leak has stopped
  • 0

#3 Tornado13

Tornado13

    Member

  • Members
  • 248 posts

Posted 09 January 2009 - 12:02 AM

Get some silicone spray, pull the trigger, spray into BOTH barrels (to prevent leaks in the other one), point at the ground, and pump. Leave to sit for 24-48 hours andsee if the leak has stopped


I thought you were supposed to pump into the pump shaft/pump tube and pump into the gun and fire not the other way in.
  • 0

#4 Blue

Blue

    Member

  • Members
  • 2,222 posts

Posted 09 January 2009 - 12:08 AM

http://nerfhaven.com...17

Edited by Blue, 09 January 2009 - 12:10 AM.

  • 0

#5 Shrub

Shrub

    Member

  • Banned
  • 862 posts

Posted 09 January 2009 - 05:18 PM

As people do with gaskets you can keep it in water or fill the tank with water and let the rubber soak it in do this repeatedly until it's totally leak free. Silicone spray might have the same effect. I don't know.
Favorite Quotes:
Sorry to hear that man, it's like that one famous bumper sticker, "Shit Happens"
QUOTE
it still seems that your balls drop very rapidly

#6 AJZ

AJZ

    Member

  • Members
  • 366 posts

Posted 10 January 2009 - 01:28 PM

@Blue: That's the same SF that I have. I purchased it from chefdave

I have concluded, it's not exactly a leak....it holds air only when I apply pressure to the pump all the way in the starting position. I pump back, and hold. After I pull forward, the air immediately jets out the left barrel as previously mentioned, so it's not exactly a leak. This is more like it firing prematurely.

I REALLY want this thing to work so please pass forth any help or advice. Especially backing up other peoples solutions.

P.S- I did try lubing it up with silicone spray, and solid lube. It didn't do much
  • 0

#7 mystefansdontflystraight

mystefansdontflystraight

    Member

  • Members
  • 1,176 posts

Posted 11 January 2009 - 06:14 PM

Well, it may help to understand how a SF valve works. Dumpster killed his, with a hammer probably, and gave me the mangled remains, which I am dissecting now. Im going to post pics tomorrow or the day after to show the NIC the internals of a SF tank.
When I owned that same sf^ I poured a capful of mineral oil down the pump, pumped 10 times, fired, (do not fire it at anything you don't want oil on) and left it overnight. It worked, but dumpster screwed it up somehow. I would reccomend doing this.
Hope this helps.
  • 0
QUOTE(Blacksunshine @ Dec 24 2009, 02:15 PM) View Post

QUOTE(white moonlight @ Dec 23 2009, 01:29 PM) View Post

It's just screaming to be rearloading...

I seen a movie about that once.



#8 imaseoulman

imaseoulman

    Member

  • Members
  • 1,005 posts

Posted 11 January 2009 - 08:05 PM

MSDFS, I would be very glad to see internal pics.

I had a leaky one that I couldn't fix to save my life. The mineral oil (which has saved one or two of my SF's) didn't help. I was about to dissect it to see what I could learn, but eventually I discovered that it originally had two leaks. The mineral oil fixed the barrel leak, but there was actually a few small holes on the tank itself. It appeared to have been nicked by a dremel bit or something and whoever was working on it, went a bit too deep causing a number of almost imperceptible leaks which combined caused a debilitating leak. I just covered it with super-glue and the problem went away.

So, long story short, I never dissected a SF (one of the few air guns that I haven't). Internal pics would be greatly appreciated.
  • 0

#9 AJZ

AJZ

    Member

  • Members
  • 366 posts

Posted 24 January 2009 - 11:00 PM

UPDATE: I really need some suggestions...I've tried various lubes (for the gun) in the barrels and up the pump. The seal seemed to improve the very first time, but its is pretty much the same other than being lubed up (the gun).

Like I said, if there was a way to keep the left valve (looking down the gun) pushed up against the front, it would probably hold air fine. For some reason it might be misaligned or slightly pulled back...

I really have no idea what to do...I may consider autopsy-ing it, but I would waste one perfectly good barrel...

Thanks a ton
  • 0

#10 chefdave

chefdave

    Member

  • Members
  • 343 posts

Posted 24 January 2009 - 11:30 PM

I never got around to trying this but I thought this might fix it: you could completely seal off the right barrel and then pressurize the chamber, it might reseal the chamber.
Or I thought you could attach the barrel, apply negative pressure (I won't say how do to risk of being added that hilarious quote to my signature, while playing with my butthole) to the barrel and pump it hoping to seal the chamber.

Good luck :D

Edited by chefdave, 24 January 2009 - 11:31 PM.

  • 0
QUOTE(VACC @ Jul 21 2009, 08:13 PM) View Post
QUOTE(crispy) View Post

Talio likes to eat his own shit.
It's a distinct possibility. But seriously, that's all you could come up with? You are a terrible Troll.

#11 AJZ

AJZ

    Member

  • Members
  • 366 posts

Posted 01 February 2009 - 09:05 PM

.

Edited by AJZ, 13 July 2014 - 06:39 PM.

  • 0


1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users