3 replies to this topic

[TheNerfLoki]

After not using airguns for a couple months, most of them have developed leaks. First my Air tech 2000 leaks out of the base of the pin at the end of the tank. My Big Salvo leaks slowly out of the barrels of 3 of the four blast chambers. My Titan cannot hold enough air to shoot a dart 30 feet, but I cannot locate the leak(s). Lastly my converted water gun leaks out of all the parts except the barrel and pump. There may be a few I am forgetting. Can someone help? Thanks (in advance).

[bogboogalars]

Stick it in a tub of water to see where the leaks (bubbles) are and then goop/epoxy them up.

Edited by bogboogalars, 06 January 2009 - 05:48 PM.

[Galaxy613]

Maybe it's the cold? They probably also have gotten dry. Spray them with 100% silicone spray.

If not, goop 'em up.

[chefdave]

After not using airguns for a couple months, most of them have developed leaks. First my Air tech 2000 leaks out of the base of the pin at the end of the tank. My Big Salvo leaks slowly out of the barrels of 3 of the four blast chambers. My Titan cannot hold enough air to shoot a dart 30 feet, but I cannot locate the leak(s). Lastly my converted water gun leaks out of all the parts except the barrel and pump. There may be a few I am forgetting. Can someone help? Thanks (in advance).

The airtech is probably shot, but the other ones should be able to be fixed by spraying with silicon spray and superglue.


*edit* Hey look my 200th post =) *edit*

Edited by chefdave, 06 January 2009 - 08:53 PM.