60 replies to this topic

[Spectre2689]

I'm leaning towards a WW2 style breach rifle. As you can probably tell, I like WW2 weapons because they're friggin SIMPLE. You shoot, you breach the barrel, allow for another round to go in, close the barrel again, and shoot. SIMPLE. Another example, Sten gun...a tube with a trigger assembly and a magazine. SIMPLE. Basically what I'm thinking is a sort of half barrel a couple inches long with a handle sticking out. To open the breach, you just slide the handle up, and the half barrel comes around to reveal another opening in the original barrel. The dart falls into the barrel. Now the tricky part, that should IN THEORY work. When closing the breach, since the darts are cylindrical, and shouldn't be more than half way into the gun, when the breach covers up the hole, it SHOULD just push the dart back up. It might be a little hard to understand what I'm getting at here, but I'll try and make something up soon.

[Blue Ice]

i swear to god that nobody gave me the name. Ask everywhere.

I like the idea of WWII style guns. But sitll, nobod has given any info on how to make a good air itght seal.

Edit: Go to google and type in ASCII Art. you should get hundreds of pages of ASCII art musems.

Edited by .:Blue Ice:., 02 February 2004 - 09:54 PM.

[NinjaBob]

A 9/19 brass barrel with a slot cut in it, and a 5/8 piece of brass to go over the slot after the darts been inserted. Simple, huh?

[Blue Ice]

yes simple, but i use cpvc, and they dont fit tightly.

Edit: The cpvc 3/4-1/2 dont fit tight

Edited by .:Blue Ice:., 02 February 2004 - 10:19 PM.

[Spectre2689]

That's because you're not doing it properly. DON'T use different sizes. Use the same size. Ex., two pieces of 1/2" copper. Cut the hole in one, and spread the sides a bit. For the breach part, it will NOT make a full cylinder. It should be just a little more than half a cylinder. You would just slide it over the barrel. A little hard to explain, which is why I'm going to make a model or something. CPVC or PVC will NOT work, because they're just too damn thick.

On another note, your views on ASCII are sadly retarded. ASCII is a format used for uploading images on to a webpage. Therefore, you can not have "ASCII art" under your name. For one, you can only have premade avatars, and for another, you can't not have a title. Therefore, if you took Liar away, you would be titleless, which just wouldn't work. Honest to God man, STOP FUCKING LYING!

[cxwq]

By `ASCII art', BI is referring to the .: and :. in his name I believe.

BI, when someone tells you that you have a member title, they're referring to the place under your name where it used to say `Member' but now says `Liar'.

Whew, glad we got all that cleared up.

[Spectre2689]

Ohhhh shit. Yeah that sounds a little better. I got ASCII and binary mixed up, my bad...

[Blue Ice]

Ok, i was misunderstanding also.

Whoat about how to make the dar things...clips i mean

[Zero Talent]

Ohhhh shit. Yeah that sounds a little better. I got ASCII and binary mixed up, my bad...

00110110 11110110 00110110 10000100 10000100 10001100 10000100

Just my 7 bytes.

[...Please don't respond in program-translated binary. Or Hex. Or anagrams, to be on the safe side.]

[Black Wrath]

You forgot your little '2' beside the bottom left of the binary code. You have to remember it's the 'base two' numbering system, now don't we?

By the way... what the fuck. Is that alphabetical binary or numerical? Actually, I have the translation on my screen right now...

Oh god.

Oh, and replying, you never said we couldn't translate into Ternary...

By the way, this is what your binary code represents... 36 246 54 132 132 140 132.

Edited by Xx_Black-Wrath_xX, 04 February 2004 - 08:00 AM.

[Spectre2689]

Zero, I swear to fucking god, I can feel my brain cells light fire and melt every time I read one of your posts.

As for you BW, what in the flying monkey sack bandanas? I've never even heard of Ternary.

[EDIT] I'm gonna patent sack bandana right here and now. The Sack Bandana, for that extra lift during the day.

Edited by Spectre2689, 04 February 2004 - 12:54 PM.

[Blue Ice]

We got off into patents and bannans, but nobody has anwsered the eternal question. How do you make a spring fed magazine?

[Ironman]

Topic is dead, drop it!

[Blaster]

Topic is dead, drop it!

why exactly is the topic dead? It isn't really that old, and the question the topic was made to answer was never answered, so there is justification and reason to go on.

[xedice]

You put a box spring in the magazine, simple as that. As for the gun, design it yourself. I would use brass since it slides well with one another. Heres an idea for you, slide the brass back to allow the spring to push up a dart, slide the brass forward to push dart into barrel, and at the same time cutting off air to the magazine, finally, fire dart.

Edited by xedice, 12 February 2004 - 10:55 PM.

[Blue Ice]

for the brass, what should I nest it in. I'll go to the hobbie and hardware store tomarrow, but I would like to know what im looking for.

EDIT: I mean the barrel, not the magazine

Edited by .:Blue Ice:., 13 February 2004 - 06:16 PM.

[Ironman]

buckbogey i mean blueshit, i mean ice , he gave you an answer, now drop it. PM him.

[THIRST]

Ironman, shutup, he asked yet another question.

It depends what materials your working with, and what your mag is gonna look like blue.

THIRST

[N3maN]

there is so much rage in this forum,
just remember, say to yourself calmly "woosaa" and rub yhe ear pressure points

ok then, i have never tried to make a clip before, but i was wonderin if it would be possible to single barrel an pc and piut a gravity clip on it instead or the movin one, or could i possibly make a movin one like the current one, or will anyone sell me one???

btw, why do u all have luittle display pics??? i am like the only one that doesnt... it is a bit of a waste of time havin one isnt it???

Edited by N3maN, 13 February 2004 - 11:40 PM.

[Blue Ice]

Thanks for the info.

You get the pics in your controls under avatar setings.

[Blue Ice]

Ok, I started building. Im usin the BAMF barrel design and my own special tank/trigger system. Pics comming soon. Anybody got any specil ideas.

Edited by .:Blue Ice:., 14 February 2004 - 07:55 PM.

[Ironman]

Ironman, shutup, he asked yet another question.

It depends what materials your working with, and what your mag is gonna look like blue.

THIRST

FUCK OFF!!
Langley was right about you. blue should have PMed him.
This topic said to not "Don't conduct personal conversations on NH"

[Blue Ice]

I dont even know what a PM is! Sorry if I screwed up your life!

Anyway, I'm using a gravity magazine with the breach on a 25* tilt, and they eject out the bottom. Everythings brass. 24" barrel, is this the right lenght? I've never used brass before.

Edited by .:Blue Ice:., 15 February 2004 - 10:03 AM.

[THIRST]

FUCK OFF!! 

Chill...

24" barrel

What kind of valve are you working with?

THIRST

[Spectre2689]

FUCK OFF!!
Langley was right about you. blue should have PMed him.
This topic said to not "Don't conduct personal conversations on NH"

Ironman, you're an asshole. Read this stuff, and tell me if they're still on topic. They are, are they not? Blue is sharing information with us, and THIRST is trying to help him, and get information from him. He's asking questions that other people might like to know. Do you have a problem with that? If you really don't like to read how a magazine-fed homemade is coming alone, just don't read this thread. Is it that hard?