9 replies to this topic

[Connor]

So I just got my Mega Missile in the mail. And its like a little version of a BBBB. And got about the same ranges with the missile thing. And after modded it get ranges of just about a Moded BBBB. So lets go started!

What you Need
-----------------

1. Hot glue/Hot glue gun
2. Hack saw
3. 1/2 in. CPVC coupler
4. 1in. of 1/2 CPVC
5. Screwdriver
6. Dremel

Now on to the mod. First off you need to get off this blue thing without braking it. Because you well need it later.

From this....



To this.....



After that take your hack saw and hack off the stock barrel.



Then hot glue the 1/2 in. CPVC coupler. Over the hole were the stock barrel was.



Now take the pump and plug the pump. By putting a little hot glue over the hole.



Next you now need to take the Dremel and Dremel the hole and make it about this big so the internal well fit in right.



Now were going to make the air flow better out of the air tank by putting hot glue on the pen and the trigger so it should look something like this.



Now on to the Hidden ammo holder...Take the 1 in. long peace of 1/2 in. CPVC



And now glue it in the handle and let it dry before doing anything else.



Then put back all the internal and you done you have about a 100 ft. shooter..




And you take that blue peace and cover back up the hole so its now hidden. So you load a dart in there and cover it back up with the blue peace. And use it when needed.


Question, Comments, Flames

Thanks

Edited by Connor, 02 January 2009 - 11:52 AM.

[slienced assassin]

This looks graet. I never realized a mega missle gets the same ranges of a bbbb. Good lob.

[samuri843]

Nice clean mod with good ranges. I love when little guns shoot farther then it looks like. Nice work.

[bamblack2000]

Sounds a lot like this

Isn't it more annoying that a BBBB because of the pump though?

[Connor]

Yea it is like that only this is a write-up. Also its way more annoying because of that stupid pump its like one in. long.

[TheNerfLoki]

6.Dermal

take the dermal and dermal the hole

It's Dremel not dermal. Other than that nice job. How many pumps do you need to pump it up?

Edited by TheNerfLoki, 02 January 2009 - 11:39 AM.

[Connor]

Around 20-25 pumps and I well fix my error thank for pointing that out..

[xtremejumpy]

6.Dermal

take the dermal and dermal the hole

It's Dremel not dermal. Other than that nice job. How many pumps do you need to pump it up?

It takes about 15 to 16 pumps on mine.

Anyways, you might have been better off using a 1/2 inch PVC coupler. That way you could have more variety with barrel choices, like petg nested in it or something of that matter.

[Connor]

This was just a Little mod for a little gun. I probably would get better ranges. But the way it is is good for now.

[sidamazo]

Just a suggestion, if you have a spare magstrike pump, it fits perfectly into where the original pump goes. A bit of hotglue and you don't have to pump a million times to fill up the tank.