Jump to content


Photo

Plasma Rifle To Nerf Plasma Rifle


14 replies to this topic

#1 rokor

rokor

    Member

  • Members
  • 792 posts
  • Location:Mississauga, Ontario
  • State:Ontario
  • Country:Canada

Posted 30 December 2008 - 04:37 PM

I was searching around the E-Web when I came across this...

Posted Image

When I searched I only came across Jerm's find of the Assault rifle that the commander uses, and a some guy that wanted to turn a Magstrike into a Plasma rifle. I couldn't find a price but when I go to Toys-be-you tonight, I'll check it out and if it's anything near what I hope it will be, then I'll have an integration that will take up the rest of my week.

P.S. Please don't say that it's not really out and such, because I found a few sites like Amazon and Target that cary them.

Edited by rokor, 30 December 2008 - 04:38 PM.

  • 0
"Sorry rokor...my cousin is gay too...it's okay...we're tolerant"
Talio in Shoutbox.

#2 Captain

Captain

    Member

  • Members
  • 814 posts
  • Location:Pepperell, Massachusetts

Posted 30 December 2008 - 04:47 PM

You're going to turn one of those into a nerf gun? Have fun, they're choc-full of electronics that you're going to have to remove. It'll probably be a pain in the ass.
  • 0
I don't care what anyone else says, Atom Blasters are fucking awesome.

#3 mind13

mind13

    Member

  • Members
  • 48 posts
  • Location:Medford,NJ

Posted 30 December 2008 - 04:54 PM

I agree with captain. They sell them at a KB toys near me and they are made for lazer tag so there must be a ton of electric components.

Edited by mind13, 30 December 2008 - 04:56 PM.

  • 0
Life comes at you fast yet a foam dart comes faster
Mind13


#4 bobafan

bobafan

    Member

  • Members
  • 635 posts
  • Location:Columbus, IN

Posted 30 December 2008 - 04:57 PM

Here is an article about the line.
http://halo.wikia.co...ag_Replica_Guns
  • 0
thaygor: all i remimber is pumping it hard and shooting than trying to pump again

---

<death09>my girlfriend broke up with me and sent me pix of her and her new boyfriend in bed
<ktp753>ouch.
<death09>yeah.i sent them to her dad

#5 CrazyIvan VI

CrazyIvan VI

    Member

  • Members
  • 295 posts
  • Location:Kent, OH

Posted 30 December 2008 - 05:39 PM

Last I saw those guns being sold it was during Halo 3 launch a year ago... the Plasma Rifle was about $120 dollars...

I don't think that's worth it just for a shell change, yeah?
  • 0
I get all giddy when I see VACC browsing a stupid topic. I just know someone is going to get banned.

#6 Puppylayer

Puppylayer

    Member

  • Members
  • 130 posts
  • Location:Naperville, IL

Posted 30 December 2008 - 05:46 PM

At the Halo 3 debut, a lot of Halo three shit was hella-expensive.

However, over a year later, the price should have fallen considerably because of the lack of demand.

Economics are fun!
  • 0
QUOTE(nerfer9 @ Dec 26 2008, 01:34 PM) View Post

Coal? You're santa arent you! You didn't give me that bike I wanted! Prepare to die!


Also active as Slayer_of_OnE at NerfLovers!

#7 Lucian

Lucian

    Member

  • Members
  • 446 posts

Posted 30 December 2008 - 05:47 PM

^ But you can get the laser tag version at KB's for about $40.

On a side note, has anyone ever been able to integrate a magstrike and maintain the clip as in keeping it clip fed?


EDIT: It might be easy if you took the plasma gun and cut it up, then you could glue/bolt the peaces over a magstrike.

Edited by Lucian, 30 December 2008 - 05:50 PM.

  • 0

Contact me for design consultation relating to 3D Printing, CNC Machining, and Laser Cutting. I am always happy to collaborate on viable Open Source projects and/or business ventures. 


#8 rokor

rokor

    Member

  • Members
  • 792 posts
  • Location:Mississauga, Ontario
  • State:Ontario
  • Country:Canada

Posted 30 December 2008 - 05:49 PM

Last I saw those guns being sold it was during Halo 3 launch a year ago... the Plasma Rifle was about $120 dollars...

I don't think that's worth it just for a shell change, yeah?



Honestly, I just spent nearly $200 on my current LS, so price isn't really an issue.

I just came back from Zellers. They have a set of plasma pistols for $34.99, and I saw the plasma rifle for 44.99(but not as detailed as the picture) and it came with a plasma pistol. I didn't bother buying either because as I said before, I just dropped a shit tonne on one blaster.
  • 0
"Sorry rokor...my cousin is gay too...it's okay...we're tolerant"
Talio in Shoutbox.

#9 Puppylayer

Puppylayer

    Member

  • Members
  • 130 posts
  • Location:Naperville, IL

Posted 30 December 2008 - 05:51 PM

On a side note, has anyone ever been able to integrate a magstrike and maintain the clip as in keeping it clip fed?


EDIT: It might be easy if you took the plasma gun and cut it up, then you could glue/bolt the peaces over a magstrike.


Well, you can cut the top to make room for the clip's path...

Edit: Since there is nearly nothing between the top and the bottom of the gun, the sides sorrounding the clip (on the MS) would be in plain view, detracting from the replication...

Edited by Puppy-žlayer, 30 December 2008 - 05:54 PM.

  • 0
QUOTE(nerfer9 @ Dec 26 2008, 01:34 PM) View Post

Coal? You're santa arent you! You didn't give me that bike I wanted! Prepare to die!


Also active as Slayer_of_OnE at NerfLovers!

#10 mulletman243

mulletman243

    Member

  • DO NOT TRADE
  • 69 posts
  • Location:Sharon, MA

Posted 31 December 2008 - 12:46 AM

No way, No how is this going to happen.
Why bring up this thread.
Do it yourself THEN make a post about it.

God there are so many dumb threads that say, " I'm going to make this, How do I do it?"
  • 0
<!--quoteo--><div class='quotetop'>QUOTE</div><div class='quotemain'><!--quotec-->Whoopty doo, I'm off to dance in the streets, and praise the word of overpriced chinese disk shots.
<!--QuoteEnd--></div><!--QuoteEEnd-->

PSN: mulletman243 Gamertag: xXMLGxMuLlEtXx

#11 rokor

rokor

    Member

  • Members
  • 792 posts
  • Location:Mississauga, Ontario
  • State:Ontario
  • Country:Canada

Posted 31 December 2008 - 10:29 AM

No way, No how is this going to happen.
Why bring up this thread.
Do it yourself THEN make a post about it.

God there are so many dumb threads that say, " I'm going to make this, How do I do it?"


I don't plan on making this any time soon, it's here to show others that they can have a working halo replica Nerf blaster with a bit of work. Think before you speak...
  • 0
"Sorry rokor...my cousin is gay too...it's okay...we're tolerant"
Talio in Shoutbox.

#12 Talio

Talio

    Not your mother

  • Contributors
  • 2,781 posts

Posted 31 December 2008 - 11:04 AM

This thread is pointless.

If it hasn't been clear from me closing all these threads, I expect more from this community. We're trying to make the site more accessible, but not at the cost of bad content and pointless conversations. You are a Nerf Haven member and as that you are expected to be an elite nerfer. If you do not feel that you deserve this title, I suggest you question anything you post and work on your skills.

Talio.
  • 0
New posts on my blog, check it out. - Click on the ad too, cause I get money per click. Give back to the Admin team for once!

#13 VACC

VACC

    Vacc is Legend

  • Founders
  • 3,265 posts
  • Location:New York
  • State:New York
  • Country:United States

Posted 31 December 2008 - 11:34 AM

Heh, I think if we required that members be elite nerfers, we'd be pretty lonely. Nerf isn't so much about winning as it is about getting out with your friends and shooting each other for fun. Now, I find winning to be much more fun than losing, but that isn't to say that we require any kind of skill to participate. If that were the case, than who would ice have to talk to here?
  • 0

#14 Talio

Talio

    Not your mother

  • Contributors
  • 2,781 posts

Posted 31 December 2008 - 11:49 AM

When I said elite nerfers, I meant not total dickwads. I felt the first was more polite.
  • 0
New posts on my blog, check it out. - Click on the ad too, cause I get money per click. Give back to the Admin team for once!

#15 VACC

VACC

    Vacc is Legend

  • Founders
  • 3,265 posts
  • Location:New York
  • State:New York
  • Country:United States

Posted 31 December 2008 - 01:25 PM

Your tact is legendary.
  • 0


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users