11 replies to this topic

[jerm78]

I made this gun because I could. Its a Longshot with a Titan attached and a At2k in the Titan shell(yes it fits inside). The Titan uses a duel action pump located in the scope. The 2K is pumped using the longshots original cocking slide(lengthened) and ofcourse the longshot is singled.





I filled in the dead space in the tip of the plunger tube using a piece of cpvc and alot of electrical tape.


The hardest part was the fact that the titans internals are made to the opposite side of the shell(exterior screws too). But it came together and it takes 7 pumps to fill the titan and 3 for the 2k and the both get the usual ranges of a singled 2k or titan, the longshot not sure but its got to be close to 100 feet(springs added)




Now its time to work on the Longshot 3k(coming Soon)

Edited by jerm78, 27 December 2008 - 09:53 PM.

[Connor]

Very nice mod.. I love it. Is there any leaking??

Edited by Connor, 26 December 2008 - 11:50 AM.

[jerm78]

No leaks. I do still have to finish off some things like cap the Titan handle and close the back of the Titan, smooth out some of the glue and paint it.

[Wes7143]

That is overkill! I love it! How is the titan pumped?

[mystefansdontflystraight]

He said the titan is pumped through a pump in the LS scope. I like it too, but it is overkill. If you had made the titan a scatter titan, maybe, but 3 long range shots is a little much. Cool idea, props for pulling it off.

[Icespartan 1114]

He said the titan is pumped through a pump in the LS scope. I like it too, but it is overkill. If you had made the titan a scatter titan, maybe, but 3 long range shots is a little much. Cool idea, props for pulling it off.

That really is overkill. I have a question though, is it really top heavy? I think you overdid it just a little bit, but I like it.

[Foof]

That deserves a nice paintjob.

[nerfer63]

That is awsome the biggest overkill of awesomeness I have ever seen

[ice]

I rely like this, except for the titan pump, which really should have been re thought. It's hard to accurately get a flat shot when trying to aim at someone looking over the scope. Hell, I even cut the attachment bars of my longshot's for more accurate aiming. What I would have done was to keep the pump where it origonally was in the titan, but not put the stock pump shell over the actual functioning pump, and connected a sideways handle to it. That way, it wouldn't interfere with aiming or firing the LS cause the pump wouldn't stick out enough to push against or even get near the trigger.
Good job though.

[slienced assassin]

This is over kill. Also you said the titan is pumped through the scope. To do that, would you use the red thing coming out of it?

[Liam]

Very, very, cool. I love the Titan Integration, beautiful fit. I wish they made red long shots so I could do this with my titan.

[mind13]

Very Intimidating. Just one question, Is the 2K turret crooked or is it just the photo? To me it seems as if the turret is angled down. Great job anyway.