23 replies to this topic

[undeadtom]

I'll let the pic do the talking:

scroll down

Edited by undeadtom, 27 January 2004 - 10:42 AM.

[sporkboyofjustice]

that link doesn't go anyplace.

[undeadtom]

Ok go here and click on various mods. if you see a red x click refresh. if that doesn't help then right click the red x go to properties and copy the address and paste it to your address bar. If that doesn't help then I'll probably need to figure something out or move it to another site. stick that in your pipe and smoke it.

Edited by undeadtom, 27 January 2004 - 10:50 AM.

[Famine]

But how does it perform? And more importantly, what the fuck did you do to that RF20?

[sporkboyofjustice]

Man that's messed up, it looks like it fell off a tall building, caught on fire and was beat by an ugly stick. Looks aside, how does it perform?

[undeadtom]

Truly it's not finished it's jujst back in working order. I'm having problems pulling the clothes hanger back because it is and uncomfortable unergonomic grip. The burns in the handle actually make it a more comfortable grip. Ninja bob here and rags will tell you that. the duct tape is simply to secure the rubber bands I'm now obviously working on the more comfortable pull back mechanism.

[sporkboyofjustice]

What would happen if you put some foam pipe insulation on the back part of the coat hanger loop and wrapped it with duct tape? I bet that would cushion it enough to make it more comfy.

[Nerfer16]

That is a very um...er... unique gun!

[undeadtom]

Well it doesn't/won't work too well till i get all the kinks out. I have gotten some of the kinks out but i need different rubba bans and for my dremel to start working properly. anyways in response to famine's post that RF20 has an SM3k's internals attached to the same pump as the RF20 internals and I'm currently trying to mod the RF20 internals so it has more power.

[NinjaBob]

Ninja bob here and rags will tell you that.

...want to make a bet on that?

[Jangadance]

• Why aren't you using the stock cocking mechanism?
• Why did you melt the handle?
• What kind of barrel is that?
• What kind of range are we talking here?

[Nerfer16]

• Why aren't you using the stock cocking mechanism?
• Why did you melt the handle?
• What kind of barrel is that?
• What kind of range are we talking here?

Janga's getting down to business.

[Pineapple]

The burns in the handle actually make it a more comfortable grip.

Or did 'ya leave the hot glue gun too close to yer grip for too long?

Nice mod...I guess. I won't be trying for a more comfortable grip, I'll just take your word for it.

-Piney-

[Grinch]

• Why aren't you using the stock cocking mechanism?
• Why did you melt the handle?
• What kind of barrel is that?
• What kind of range are we talking here?

Probably because he tried to mod it, and...

• The stock mechanism broke.
• He probably left the glue gun too close on accident.
• Looks like Crayola.
• Probably not so good.

[undeadtom]

Stock mech broke, no i wanted to be able to put rubba bans on it but that is fucking me

Left glue gun to close, no i got lighter happy and made it a comfortable feeling gun

Range is actually the same so I'm probably going to change it back to the original cocking mechanism and yes that is a crayola because That is what i had lying around when i barrel modded it about a couple months ago and i don't feel like screwing with that part because part of it broke. anywho I'll probably just change it back cause it's easier to cock that way so yeah this topic could probably use a little stabbing.

[Formerly Sane]

Range is actually the same so I'm probably going to change it back to the original cocking mechanism...

How you did all that and still got it to perform the same way is beyond me.

[Ragornocks]

I would love to show everyone the picture I got of his SM3000...somehow, he had the pump in the back, the trigger wire where the pump should have been, the holes where obviously made with a hammer or something, and the barrel was cut and placed at a 45* angle. And the thing still worked.

[Nerfer16]

How does this guy have a knack for completely destroying guns and still making them work?

[undeadtom]

Ok rags, haahaahaha, I can't believe that worked either, if you do show them that crapped pic then show them the pic of it when i left. anywho yes i have a knack for destroying guns and making them work as you said, because umm... Taboo? actually i just get lucky enought not to kick their asses when i destroy them so I'm able to put them back together. and rags again, We really need to get my friend hunter at our next war, can you say "canon-fotter", I keep popping him with hat thig from close ranges, yeah the second pic Actually makes me seem like the Jesus of nerf.

Edited by undeadtom, 29 January 2004 - 04:18 PM.

[newnerfer356]

If you wanted to mod it without destroying it you could have taken off the little blue thing on the inside of the barrel and took a crayola barrel and cut a little off the front of the crayola barrel so that it just fits on the little part sticking out in the barrel. I did this without destroying it and now it shoots micros good.

[Black Wrath]

I did this without destroying it and now it shoots micros good.

Who learned you how to spoke?

[undeadtom]

me did. Plus his post was "Like totally" misunderstanding my way of destroying it. anywho my main message was me did.

[waspy]

Whta kind of barrle is on the first shot.

[undeadtom]

Stock mech broke, no i wanted to be able to put rubba bans on it but that is fucking me

Left glue gun to close, no i got lighter happy and made it a comfortable feeling gun

Range is actually the same so I'm probably going to change it back to the original cocking mechanism and yes that is a crayola because That is what i had lying around when i barrel modded it about a couple months ago and i don't feel like screwing with that part because part of it broke. anywho I'll probably just change it back cause it's easier to cock that way so yeah this topic could probably use a little stabbing.

Happy? Why won't this die?!?!?! :stab: :stab: :stab: