Jump to content


Photo

At3k Mod

I had a At3K, now i have this.

7 replies to this topic

#1 TheBolt

TheBolt

    Member

  • Members
  • 43 posts

Posted 20 December 2008 - 09:23 PM

Recently I bought a At3K Twin pack. I Singled one and the other one had around 4 stripped screws. I decided to try to open it up in the fun way. While hack sawing the shell open, I accidentally punctured a vinyl tube. After salvaging the internals, I needed a shell to put it all in. I got to work.
Materials:
AT3k Internals
A red light accessory from a recon
Hot glue
CPVC Barrel
First, cut of the goo gauge, the tubing connecting the gauge to the tank, the plastic counected to the bottem of the tank, and all of the firing pin behind the black nub. You should end up with this.
Posted Image
Next, connect the tubing from the pump to the tank. Seal it up with hot glue.
Posted Image
Third, take the useless red light included with the recon and remove the guts. Then cut out all that I did
Posted Image
There is some plastic cut out to make room for the hose
Posted Image
you might have to cut and/or sand some other parts to get it all in.
Fourth, fit the internal in like this
Posted Image
Fifth close it all up. It wont quite fit, so use every screw to hold it in.
Sixth glue the top of the pump to the bottom of the shell. USE A LOT OF GLUE.
Lastly i cut a piece of plastic and bent it until it would stop the pump from coming out if glued to the bottom.
Final product
Posted Image

Edited by TheBolt, 20 December 2008 - 10:02 PM.

  • 0

#2 veginator

veginator

    Member

  • Members
  • 301 posts

Posted 20 December 2008 - 09:27 PM

Please don't do this again. PLEASE.

Edited by veginator, 20 December 2008 - 09:28 PM.

  • 0

#3 Renegademilitia15

Renegademilitia15

    Member

  • Members
  • 516 posts

Posted 20 December 2008 - 10:13 PM

Please don't do this again. PLEASE.

What was that for? I think this mod is pretty handy.

Can you still clip it on the accessory rails?

Nice mod.
  • 0
Singled RFS
FA_24's response to Ice's back pain thread:
QUOTE

I used to have that problem until I got circumcised. 15 pounds later I was able to stand up straight.

#4 TheBolt

TheBolt

    Member

  • Members
  • 43 posts

Posted 20 December 2008 - 10:48 PM

The rails work fine as long as you don't shake the gun to much while using the rail.You cant shake it to much as the small piece that held the accessory in was removed to make space. As for what veginator said, I believe he was referring to an accident that I made where I posted an incomplete write up
  • 0

#5 durka durka

durka durka

    Member

  • Members
  • 364 posts

Posted 20 December 2008 - 10:59 PM

And now I know what to do with my at3k. Nice job.

I was going to do an intergration with my 3k but the valve keeps acting up when its out of line by just a little bit. this write up could give me some ideas.
  • 0
"The warrior who cultivates his mind polishes his arms"

#6 loni

loni

    Member

  • Members
  • 78 posts

Posted 20 December 2008 - 11:10 PM

Nice mod, effective, and creative. Its pretty interesting what you can shove an AT3K into these days. Good work.

-Loni

Edited by loni, 20 December 2008 - 11:10 PM.

  • 0
"I don't nerf to see who is the best, I nerf to see who is the biggest bitch"

#7 Jaymel1989

Jaymel1989

    Member

  • Members
  • 35 posts

Posted 21 December 2008 - 12:25 AM

Another good use for the light. Its good and clever mod. I love some accesory guns :alien: good job
  • 0
QUOTE
~When life hands you lemons. Mod the fuck out of it so it can get 100' flat. also do a apple intergratation to it. it looks nice and adds accuracy~ Jaymel1989



#8 Betrayal

Betrayal

    Member

  • Members
  • 115 posts

Posted 21 December 2008 - 01:10 AM

Nice. But I don't see a point for a light. Maybe you could intergrate by rails?

Edited by Betrayal, 21 December 2008 - 01:10 AM.

  • 0
QUOTE(VACC @ Apr 15 2009, 11:23 AM) View Post

Doing shit is hard work.

VACC


1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users