9 replies to this topic

[fight fire with fire]

I'm not new to nerf, just new to modding, or well, not very good at it. I opened up my longshot and put a bbb spring ls spring and nf spring in it. im about to go test ranges. but i would appreciate it if anyone had some mods i could preform that would improve, range, comfort, or usefulness. But something that i could do.

[CrazyIvan VI]

http://nerfhaven.com...?showtopic=7527


That's what you need.

If you would have read the forums, you would have seen that. Stickies are there for a reason, so you will read them and they are easy to locate in the future. Also if you had read you would have found that there is another topic just like this one.

[fight fire with fire]

sorry as i said im new i dont know much about this website

[Foof]

Take the ar out for one.

[fight fire with fire]

about the AR./ I cant seem to get it out. i pulled and pulled but it wont come out. i even cracked the plunger tube while trying to get it out. i sealed the crack with e-tape and duct tape though

[rippen11]

about the AR./ I cant seem to get it out. i pulled and pulled but it wont come out. i even cracked the plunger tube while trying to get it out. i sealed the crack with e-tape and duct tape though

I don't get how you could pull on the AR. I cut the three tabs with a knife and the whole assembly slid out.
And I don't think that a cracked plunger tube can be fixed with duct and E-tape, but I have been wrong before.

[Nerf Bros]

check out pineapples string it has some great mods, and make sure to do the Captain Slug's 12 shot clip mod

[fight fire with fire]

[/quote]

I don't get how you could pull on the AR. I cut the three tabs with a knife and the whole assembly slid out.
And I don't think that a cracked plunger tube can be fixed with duct and E-tape, but I have been wrong before.
[/quote]

i also used hot glue underneath it, to originally cover the crack.

And, while I probably sound like an idiot saying this, what three tabs?

[nerfnut23]

The 3 tabs on the back of the bolt. And as for the AR, just use a 1/2" wood bit(flat) and drill straight thru the back of the bolt and you will remove the AR and improve airflow.

[Nobber]

Well, okay, there is a pinned thread about longshot mods, and you should know what you should be able to do( if you can't do it, don't!). And please, work on your grammar.

Edited by Nobber, 21 December 2008 - 03:50 AM.