Vulcan Won't Feed
#1
Posted 20 December 2008 - 01:58 AM
I got it at goodwill...
It did fire at first, but usually every third dart stayed in the belt. Then it died (stopped feeding).
I think the real problem is the belt feed-gears not moving; as it will fire a dart (using the electric fire).
If it helps any, the weapon will not cock to fire semi-auto/manual either.
Not scared to crack the beast open either; any feedback appreciated.
Thanks.
#2
Posted 20 December 2008 - 02:42 AM
#3
Posted 20 December 2008 - 02:53 AM
can that be repaired (e.g. with glue, probably not...)The rotating gear is probably cracked. This happens to alot of Vulcans.
#4
Posted 20 December 2008 - 09:14 AM
#5
Posted 20 December 2008 - 11:04 AM
Talio in Shoutbox.
#6
Posted 20 December 2008 - 11:39 AM
It did fire at first, but usually every third dart stayed in the belt.
I had this problem when I first got my vulcan. Eventually it started to fire them all.
Recently, my vulcan's wheel was internally jammed. It should be an easy fix once I get it open. There is just one thing, I can't get the bolt off! I tried prying it off with a flathead screwdriver, but no luck. Anybody know how to get it off easily.
#7
Posted 20 December 2008 - 11:44 AM
It did fire at first, but usually every third dart stayed in the belt.
I had this problem when I first got my vulcan. Eventually it started to fire them all.
Recently, my vulcan's wheel was internally jammed. It should be an easy fix once I get it open. There is just one thing, I can't get the bolt off! I tried prying it off with a flathead screwdriver, but no luck. Anybody know how to get it off easily.
Get one of those tiny needle nose pliers, stick it under the priming handle, and use leverage and all your strength to get that little fucker off!
Talio in Shoutbox.
#8
Posted 20 December 2008 - 11:45 AM
It did fire at first, but usually every third dart stayed in the belt.
I had this problem when I first got my vulcan. Eventually it started to fire them all.
Recently, my vulcan's wheel was internally jammed. It should be an easy fix once I get it open. There is just one thing, I can't get the bolt off! I tried prying it off with a flathead screwdriver, but no luck. Anybody know how to get it off easily.
Try the back of a hammer.
#9
Posted 20 December 2008 - 12:07 PM
It did fire at first, but usually every third dart stayed in the belt.
I had this problem when I first got my vulcan. Eventually it started to fire them all.
Recently, my vulcan's wheel was internally jammed. It should be an easy fix once I get it open. There is just one thing, I can't get the bolt off! I tried prying it off with a flathead screwdriver, but no luck. Anybody know how to get it off easily.
Try the back of a hammer.
Back of a hammer works great.
My friend's Vulcan had the same problem. He told me he opened it and messed with the internals and put it back together and it worked fine. From what I got from that was I think his gear was jammed. Maybe yours is jammed.
#10
Posted 20 December 2008 - 08:10 PM
#11
Posted 20 December 2008 - 09:15 PM
Depending how much you payed 4 the gun it is probability not worth the time or effort to fix
Do you honestly beleive that. Your on a Nerf modding Forum, everything we do here is cheap and not worth the time.
Talio in Shoutbox.
#12
Posted 20 December 2008 - 10:39 PM
It did fire at first, but usually every third dart stayed in the belt.
I had this problem when I first got my vulcan. Eventually it started to fire them all.
Recently, my vulcan's wheel was internally jammed. It should be an easy fix once I get it open. There is just one thing, I can't get the bolt off! I tried prying it off with a flathead screwdriver, but no luck. Anybody know how to get it off easily.
To quote Forsaken_Angel24: Be a man, use your hands!
I agree, I just ripped the thing clean off. Or use a crowbar.
#13
Posted 21 December 2008 - 10:08 AM
#14
Posted 21 December 2008 - 03:45 PM
You have your shit backwards.Depending how much you payed 4 the gun it is probability not worth the time or effort to fix
The less you pay for a gun makes it more worth it to tear it apart because you have less to lose if you mess it up beyond repair.
I'd much rather open up a 4.99 Vulcan from goodwill then a $50 off the shelf of target.
#15
Posted 26 December 2008 - 07:11 PM
my little brother explaining a small dinosaur
"I BUILT A TACO, A METAL TACO!"
another quote from my little brother
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users