5 replies to this topic

[jerm78]

I still got some kinks to work out with the spring gun and if I pump the BB full the pin wont pull but I'll work them out later. I also need to fill in some empty gaps and paint it but its pretty simple just a BBBB stuck in a longshot.




and the almost finished project.

Edited by jerm78, 20 December 2008 - 01:15 PM.

[Icespartan 1114]

That's really creative. Nice work! How much did you have to dremel out for the coupler to fit into place correctly by the way. I am going to try this over the weekend.

[CrazyIvan VI]

I'm thinking about taking the AT3k and putting it in my LSFG.

Looks really good!

By the way Jerm, did you ever do anything more with the Airzone 8 Shooters?

[Ambience 327]

Now this I like. I'm a little surprised that the BBBB fit into that space. Did you have to cut the pump down any to get it in there, or is it still full-length? I think if you put an RSCB clip on there, you'd have a ROF that would make this thing a true beast, able to rival even a well-modded Longshot, with the added advantage of being smaller and lighter. (I would think pumping it while tilting it down to load the next dart from the RSCB would be a relatively quick and easy task.)

One of these days I'll decide just what I want to do with my LSFG. This, or something like it, might just be the front-runner.

Edited by Ambience 327, 17 December 2008 - 02:17 PM.

[xtremejumpy]

I think this is next to the perfect secondary. Good ranges with the BBBB, but you can still fire if you aren't pumping. Plus, the lsfg is a piece of shit without anything special, and if you did a dtb intigration to the Ls, (or any intigration that really sticks out) you can't use it. Good mod, worth doing, and looks a little easier than the titan minimization...
You should try and have the BBBB fired by a keyring, if at all possible. Please don't flame me, I have never seen the insides of a BBBB. Its still a thought.

Edited by xtremejumpy, 17 December 2008 - 08:02 PM.

[Ambience 327]

You should try and have the BBBB fired by a keyring, if at all possible. Please don't flame me, I have never seen the insides of a BBBB. Its still a thought.

I don't think that's necessary. Unless I'm completely misinterpreting what I'm seeing, the BBBB is attached to the LSFG's trigger - i.e. both guns fire from the same trigger. (I see a piece of what looks like coat-hanger wire or something similar that leads from the BBBB pin down past the LSFG spring to the trigger mechanism.) Assuming I'm correct, that means he can:

1) Pump up the BBBB, load a dart, and fire...
2) Cock the LSFG, load a dart, and fire...
3) Pump up the BBBB, cock the LSFG, load two darts, and fire (with drastically different ranges!)...

...all from the same trigger.


If I was using this blaster, I'd keep the BBBB pumped and loaded, and just keep the LSFG loaded, but not cocked. Then, if I need a quick extra shot (to fend off a rush or something), I'd quickly cock the LSFG and fire.

Edited by Ambience 327, 18 December 2008 - 10:20 AM.