Jump to content


Photo

Vulcan Handgun?


6 replies to this topic

#1 hiei21

hiei21

    Member

  • Members
  • 1 posts

Posted 16 December 2008 - 12:21 PM

I've looked around for ideas and finally after seeing the guts of a vulcan, I thought of making it into a handgun. Now I know I'm new to modding and such. But I was wondering if maybe this idea would work. Maybe even just cutting off all the unnecessary bulk in the gun.

Take the guts out of the gun, and make a case to fit it. Then use the belt and connect it to make a circle use like some strong velcro. Make a container to keep the chain smooth and allowing it to rotate into the gun. After the shot is discharged the belt just feeds through so you no longer need to deal with the belt on the ground and tripping on it. Plus you can just hook another box up and velcro the strips together and your ready to rock. Any ideas on how to do this/has it been done? I've checked around but I did not see anything like it.
  • 0

#2 rokor

rokor

    Member

  • Members
  • 792 posts

Posted 16 December 2008 - 12:25 PM

It would be awesome to see, but in reality, nearly impossible to be done. Everything that moves the plunger and chain is pretty much as packed as it will get, and if you were to remove it all... well you would have a single shot Firefly. Just my two cents, but dont let me get your ideas down.
  • 0
"Sorry rokor...my cousin is gay too...it's okay...we're tolerant"
Talio in Shoutbox.

#3 infidel

infidel

    Member

  • Members
  • 21 posts

Posted 16 December 2008 - 12:38 PM

I think it might work but i haven't seen the internals of a vulcan before. If you do actually do it then it would be kinda like a mini uzi. wow a handgun that shoots 3 darts a second.....that would be wicked!!!!
  • 0
"yeah, we suck in close combat. its a shame you'll never get there."

"you CAN have your cake and eat it too"

"school is a microcosm of society"-elmo

"Never do today what you can put off till tomorrow because delay may give clearer light as to what is best to be done."
Aaron Burr

#4 Split

Split

    Member

  • Members
  • 1,771 posts

Posted 16 December 2008 - 12:46 PM

You can cut back and remove most of the manual firing mech pieces as I did in my Overhaul, then relocate the handle, and all you have to do for the trigger is move the electronic switch, which is a breeze. Relocate and replace the batteries again like I did, some basic minimization the the front, move the on/off switch and cut down that area, and that's about as good as you're going to get, which isn't really bad at all. I thought about the circle chain thing; don't use velcro, just using the method to attach chains would be plenty effective.
  • 0
Teehee.

#5 Mr BadWrench

Mr BadWrench

    Member

  • Members
  • 781 posts

Posted 16 December 2008 - 01:05 PM

As long as we got splitlip saying what if?

Would it be possible to glue barrels directly to the rotation mech on a vulcan and make it into a "minigun" ?? with rear loading it should be quite effective.

Don
  • 0
NerfChat IRC Chatroom Click to chat!

#6 Draconis

Draconis

    I am not Lord Draconical

  • Members
  • 2,712 posts

Posted 16 December 2008 - 02:45 PM

As long as we got splitlip saying what if?

Would it be possible to glue barrels directly to the rotation mech on a vulcan and make it into a "minigun" ?? with rear loading it should be quite effective.

Don



Yes, though unlike, say, the Doomsayer, there are only six points in the rotation. So you would only have six shots before you have to completely reload. At that point, you would be better off with a magstrike. It would LOOK awesome, but wouldn't really perform all that well.

Oh, and I've DONE the circle chain thing, and it works pretty well. You might be surprised how short it makes the chain, though. At least with only one chain.

Edited by Draconis, 16 December 2008 - 02:47 PM.

  • 0
[15:51] <+Noodle> titties
[15:51] <+Rhadamanthys> titties
[15:51] <+jakejagan> titties
[15:51] <+Lucian> boobs
[15:51] <+Gears> titties
[15:51] <@Draconis> Titties.
[15:52] <+Noodle> why is this so hard?

#7 Talio

Talio

    Not your mother

  • Contributors
  • 2,781 posts

Posted 16 December 2008 - 02:52 PM

No, we're not going to allow these threads anymore. They don't contribute anything. If you have an idea, DO SOMETHING. Draw a picture, draw some lines on a vulcan, actually...I don't know. Try it. PM the guys you know are awesome at modding, but do not start these threads with your crazy shit ideas that no one has tried before and no one knows whether it will work. You don't see the great gunsmiths of this board like Split, FA and slug making these topics and you shouldn't either. Do some work and then you get to jack off in public about it. Personally, the rest of us don't want to hear about your fantasies.

Talio.
  • 0
New posts on my blog, check it out. - Click on the ad too, cause I get money per click. Give back to the Admin team for once!


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users