16 replies to this topic

[Puppylayer]

This marks my first actual contribution to this site, so hopefully it is good enough for the directory.

The Mod:

I did a:

AR removal

Spring addition

Barrel Exchange (crayola, secured with plumber's goop)

Mad Rage of furry.

Edit: Sorry, this is my first image post, I will reduce size next time...



The TTG. Open it.



It opened. Most of the mods are in already.



The barrel, Crayola, smoothed with a wide drill bit, secured with plumber's goop, front smoothed with bench grinder.






The spring. From a toilet paper shtick. (No perverted jokes)



On the plunger.



Oh, and a better plunger seal, too!



The best part: A silenced, beefed, pubed up TTG: That Shoots! Oh Joy!


Pubes!


FPS view:



Ranges Before: 25-30 ft.

Now: 50 ft.

Estimate future ranges, with PVC, better spring, and removal of dead space:

70-80 ft.

-P§

Edited by Puppy-§layer, 14 December 2008 - 10:49 PM.

[Puppylayer]

Sorry for double post (will not happen again), but would SCH 40 PVC go well with BuzzBee darts, because I used 5 ft of it as a blow pipe, the put a BB dart in, and got semi-modded LS ranges...?

[UpperHand]

You are getting off the excess pubes on the outside right?

[Puppylayer]

Yes, I just shaved the pubes off a few minutes ago. Now it's nice, smooth, and clean.

Edit: Ah shit... I know someone is going to immortalize me with that.

Edited by Puppy-§layer, 14 December 2008 - 06:36 PM.

[boom1]

Yes, I just shaved the pubes off a few minutes ago. Now it's nice, smooth, and clean.

Edit: Ah shit... I know someone is going to immortalize me with that.

Oh that is so fucking added that hilarious quote to my signature, while playing with my butthole but on topic Ithink it would have been funny to leave the pubes on.

[CaptainSlug]

Sorry for double post (will not happen again), but would SCH 40 PVC go well with BuzzBee darts, because I used 5 ft of it as a blow pipe, the put a BB dart in, and got semi-modded LS ranges...?

Are you asking others to confirm the results you got when you ran your own practical test instead of simply repeating your practical test?
That's seriously pathetic. If you have it on hand to try it, don't waste the time of others in asking them if it will work, just try it and find out.

This hobby is about experimentation. It's not about asking others if what you have done is right or wrong.

[rork]

Wow. *Shakes off the icky feeling* On topic: Crayolas are outdated as barrel material in a big way. CPVC will fit the body of stock darts; sch. 40 pvc will fit the head. Just put in a bit (2 1/2-3" or thereabouts) of CPVC (or petg/brass/whatever fits your darts), and that way you will be able to upgrade to stefans later.

[boom1]

Come on guys I know that there is a pube joke going through your head let your joke free.

[deaddumpster]

I think you should call it either Pubert or "Pubertis".

[Norther of Heaven]

Nice.. Legos! I doubt that mass of fluff will suppress much of the sound.

[Puppylayer]

Slug, I was simply asking if SCH 40 PVC would work for a tight enough airflow, because I am slightly afraid to goop 4 inches of it onto Pubert just to get the results I may not want. However, I agree on your view of experimentation, and will try to turn to that in the near future.
*coughnextmodcough*

-P§

[imaseoulman]

I really don't think anything in this thread is even slightly funny.

[stickfigure91x]

I really don't think anything in this thread is even slightly funny.

I think its funny that they think its funny.

[Blacksunshine]

teeheehee pubes teeheehee I feel all giggly and I don't know why.

[VACC]

I'm with Sunny here, nothing funny has been said. Fact.

[Lynx]

You did nothing new.

Good write-up for shit we (should already) know.

[Puppylayer]

Wow, Thanks. I feel all fuzzy inside.

But in the directory, no TTG was shown with a crayola barrel, so I thought I would try it.

Anyways, I have more plans for Pubert. He will be back.

In the meantime, it's time for me to spam the fuck out of Halo forums.