Posted 10 December 2008 - 02:18 PM
Posted 10 December 2008 - 02:24 PM
Hope that helps!
If at first you don't succeed, add more epoxy.
Posted 10 December 2008 - 02:57 PM
Posted 10 December 2008 - 06:25 PM
Edited by nerf mafia, 10 December 2008 - 06:27 PM.
Posted 10 December 2008 - 06:45 PM
Since you're too young to get a hotel, you should look around, maybe check some aim chatrooms.
Theres alot of really friendly, nice people out there, that'd be more than willing to accomodate a young boy.
Posted 10 December 2008 - 07:55 PM
Yeah, I use stock darts (no fbr in bc), so that's probably it.
Posted 10 December 2008 - 09:50 PM
nerf mafia: Modman's petg is ID .528 and that's the same as OMC petg. EDIT: Maybe your modman petg is screwed.
Edited by Betrayal, 10 December 2008 - 09:51 PM.
Posted 10 December 2008 - 09:57 PM
I've used both petg's and they were not the same modman's is bigger id at least with both being heavy wall. I have some darts made from Angel's red foam which fits omc petg nicely but they fall out of modman's petg.
Nope, check the dimensions that each seller has up where they sell the foam. Exact same dimensions. It is quite obvious they both order from visipak.
Posted 14 December 2008 - 07:36 PM
What the hell's my problem?
When using stock darts you get a good fit using crayolas as a barrel, but not with PETG. This isn't a problem, it's a matter of making a choice between two options.
They have different inner diameters and will only work for darts that fit that size of barrel.
Either use crayolas and stock darts, or make stefans and then find a barrel material that fits them. A barrel material isn't going to give you a range improvement if it's not a size that fits your darts.
Edited by CaptainSlug, 14 December 2008 - 07:37 PM.
Posted 15 December 2008 - 06:09 PM
Posted 15 December 2008 - 06:26 PM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users