#1
Posted 07 December 2008 - 06:39 PM
The SCR-6:
It has some similarities to the snap, but also several differences.
1: There is no bar coming out the back of the gun, which allows the user to hold the rifle to his chest before firing.
2: It has a built in "ladder sight" that Cartoon has explanations for here: http://nerfhaven.com...hl=Ladder Sight
I did however, put my own twist on it, where the ladder is on a hinge so it stays out of the way while firing, and is velcroed to the body. The view is like this:
3: It uses a stripper clip, but it is more like a chain, so that when the bottom barrel is loaded on the top barrel stays out of the users line of sight. It is connected via velcro so that when one barrel is damaged/breaks, it can be replaced:
4: It has a hinge in the stock, (which is hollow), to allow the user to hold a second clip:
5: It has a stock, handle, and barrel support made of wood.
6: Last, but most importantly, it cocks from the side! It has a metal bar which has a rubber/foam grip to allow for easy firing:
As for the stats, it gets mid 80's. The plunger system is the same to the SNAPs, however, the spring is housed inside a 3/4" coupler. The ROF is a little faster than a NF.
Even though I am happy with the stats, my main goal was to create a relatively realistic looking rifle, that could still perform well enough to be my primary. I think I was sucessful. A couple more pictures of it just for kicks:
Questions, Comments, Flames?
-Upperhand
#2
Posted 07 December 2008 - 06:53 PM
#3
Posted 07 December 2008 - 06:56 PM
Edited by AJZ, 13 July 2014 - 06:45 PM.
#4
Posted 07 December 2008 - 07:00 PM
Sorry, the plunger from front to back is:
Endcap with rubber washers in it like a snap, then 3/4" pipe, then a coupler. The spring is housed inside the coupler, and the coupler is sanded down, so that the trigger is locking over a coupler and not an endcap (same idea though). A picture is worth a thousand words:
Edited by UpperHand, 07 December 2008 - 07:01 PM.
#5
Posted 07 December 2008 - 07:17 PM
#6
Posted 07 December 2008 - 07:27 PM
Sure. Not primed:Can you put it back together and get a picture of it cocked? Don't take a picture of the whole thing, just focus on the pressure chamber.
And primed:
EDIT- Hey AJ.Z, I don't think its THAT ugly...
Edited by UpperHand, 07 December 2008 - 07:33 PM.
#7
Posted 07 December 2008 - 07:39 PM
#8
Posted 07 December 2008 - 07:51 PM
I'm actually working on something like this with a shotgun grip. Can be seen partway complete here:Thanks. I understand how it works now. I thought you connected the front handle to it so it'll work like a shotgun.
http://nerfhaven.com...showtopic=14158
#9
Posted 07 December 2008 - 08:28 PM
SGM's Shred Shop -Mod Service
NerfHaven's resident drama queen.
#10
Posted 07 December 2008 - 08:29 PM
SGM's Shred Shop -Mod Service
NerfHaven's resident drama queen.
#11
Posted 07 December 2008 - 08:56 PM
FA_24's response to Ice's back pain thread:
I used to have that problem until I got circumcised. 15 pounds later I was able to stand up straight.
#12
Posted 07 December 2008 - 09:21 PM
He hasn't been active in over two years, and you misspelled SCR-6.Thats pretty good as most homemades I've seen. But Just as a suggestion, I would think about changing the name, because even though its SCR-6, thats still really close to Boltsnipers Scar.
#13
Posted 07 December 2008 - 09:47 PM
It's ugly. Oh well. THink about putting less furniture on your next one.
He hasn't been active in over two years, and you misspelled SCR-6.Thats pretty good as most homemades I've seen. But Just as a suggestion, I would think about changing the name, because even though its SCR-6, thats still really close to Boltsnipers Scar.
Whoops, sorry. I thought I saw the title say SCAR.
FA_24's response to Ice's back pain thread:
I used to have that problem until I got circumcised. 15 pounds later I was able to stand up straight.
#14
Posted 07 December 2008 - 10:15 PM
That thing is just so fugly, it'd be funny to watch people get hit by it. Vacc said something like that awhile ago...
It is VERY ugly, but I really don't care.
It is very ugly in the most beautiful way. Good work.
It's ugly. Oh well. THink about putting less furniture on your next one.
Now I just feel bad...
I might take off the ladder sight, and will definitely clean up where the plunger tube attaches to the stock.
#15
Posted 07 December 2008 - 10:46 PM
#16
Posted 08 December 2008 - 10:25 PM
#17
Posted 08 December 2008 - 10:47 PM
I think the main reason it's ugly is the fact you painted it the color of shit, which in any case is wierd. Or chocalate ice cream.
Maybe paint it a different color? I like it, but I wouldn't want to hold it...
#18
Posted 09 December 2008 - 02:47 PM
Dosen't the hinge on the stock hurt to use?
No... And at AJ.Z, it probably because of the front handle. It looks signifigantly better w/out it.
#19
Posted 20 December 2008 - 09:22 PM
#20
Posted 20 December 2008 - 09:38 PM
#22
Posted 23 December 2008 - 12:10 AM
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users