Jump to content


Photo

Unisex Pas Coupler System

Accepts all barrels

17 replies to this topic

#1 Icespartan 1114

Icespartan 1114

    Do NOT buy/sell with me

  • DO NOT TRADE
  • 934 posts

Posted 07 December 2008 - 02:42 PM

Okay I have had a my PAS shotgun for about 3 weeks now and about 2 weeks ago I went over to Ice’s house and we modded it together, but he or I never made a write-up for it so I am doing that now. So thanks Ice.

Ok first off what you want to do is open the gun up and remove the plunger tube, it looks just like a piece of thin walled PVC (not sure on the size though). Then remove the plunger rod and remove the brown latch thing on it. Then add a spring/springs to it. Mine has a Longshot spring added to the stock spring.
Posted Image

Then at the top of the plunger tube remove the hug ass ball shooter and just through it away, you won’t need it at all. Then take off the brown funnel that was underneath that. Next saw a CPVC coupler half way then hot glue around the coupler and shove that in the back of brown funnel piece.
Posted Image

Then just take a ½ PVC coupler and hot glue that on the top of the brown funnel like so, Posted Image, I then wrapped it in E-tape.

Now since you have to reinforce the trigger with spring. So what we got the catch spring and the little spring from the orange nub in the back of a Longshot front gun and put that behind the trigger as well and getting a spring from I think a strikefire and glue that under the trigger.
Posted Image

When it was assembeled it was really damn loud so I decided it needed to be silenced.
Posted Image
Posted Image

Also added foam to the plunger cap.
Posted Image

So after that’s all done you should have a really good Pump action shotgun. Since it has PVC and CPVC coupler is can accept any kind of barrel now! The ranges are about 100 feet; it is very cold where I live now so in the summer it would do much better. I will have ranges in about 2 hours.

Questions, comment, suggestions? Just tell me what you think.

RANGES: (NOTE, all my range were done flat with 1/4 steel slingshot weights)
82 ft
91 ft
94 ft
90 ft
103 ft
62 ft, Really shitty dart.
109

Edited by Icespartan_1114, 09 December 2008 - 08:32 AM.

  • 0
QUOTE(Zaxbys @ Mar 2 2009, 02:08 PM) View Post
I won't be there til about 1-2...

Church... gotta soak up that Jesus!


NERFSTRONG #51

#2 Connor

Connor

    Member

  • Members
  • 159 posts

Posted 07 December 2008 - 03:56 PM

Ice did'ent make a write-up but he made a video on it...... But I like it good easy mod thanks.

Edit - there all right you did't need to do a write up on this the video was good.

Edited by Connor, 07 December 2008 - 05:02 PM.

  • 0
Opinions are like Assholes, Everyone has one.

F_A 24 is the KING of nerf.

#3 Gears

Gears

    The boy who lived

  • Members
  • 848 posts

Posted 07 December 2008 - 04:45 PM

Vey, very nice.

This is the sort of mod I adore, simply because of the versitility. I'm one of those guys who switch between foam brand/barrel material constantly, so this is pretty near damn ingenious.

Removing dead space+actually doing something creative with it=Win.

Edited by Gears, 07 December 2008 - 04:45 PM.

  • 0


WoW is destroying my life.

-Groove out.
 

 
LAWN GNOME LIBERATION FRONT
 

#4 Split

Split

    Member

  • Members
  • 1,771 posts

Posted 07 December 2008 - 04:47 PM

Holy crap! Now there's a coupler, that can take any kind of barrel! You're totally amazing sauce!

Seriously.. It's a coupler on a gun. Aren't there like 90 threads on this same mod? What's the obsession with the PAS?
  • 0
Teehee.

#5 silentsnipe

silentsnipe

    Member

  • Members
  • 377 posts

Posted 07 December 2008 - 04:56 PM

Holy crap! Now there's a coupler, that can take any kind of barrel! You're totally amazing sauce!

Seriously.. It's a coupler on a gun. Aren't there like 90 threads on this same mod? What's the obsession with the PAS?

It's not just a coupler, It's a UNISEX barrel. Do you not see the sex in it's name?

On topic: Nice, clean mod. Splitlip is right though, there is a lot of threads about this.
  • 0
QUOTE
And it's absolutely rated R for the violence. Also boobies. And pee pees.

Talio.


Join TheNerfFreaks.forumotion.com TODAY!

#6 Wes7143

Wes7143

    Member

  • Members
  • 758 posts

Posted 07 December 2008 - 04:59 PM

It's not like you even had to do any work. The Sch.40 PVC coupler slides over the plunger cap. You didn't even secure it well, you used hot glue and tape. It's not that big a deal, you did basic mods to a PAS, which have been done before and will be done again.

Good day sir.
  • 0
QUOTE(VengefulWaffle)
Get off my boyfriend


If at first you don't succeed, add more epoxy.

#7 ice

ice

    Member

  • Members
  • 895 posts

Posted 07 December 2008 - 05:02 PM

And just for the record, Icespartan_1114 had nothing to do with the barrel system, as he left before it was finished. Modding it "together" was not what happened.
And thanks for the complements Gears.
  • 0
<!--quoteo(post=206428:date=Jan 25 2009, 05:17 PM:name=Mukersman)--><div class='quotetop'>QUOTE(Mukersman @ Jan 25 2009, 05:17 PM) View Post</div><div class='quotemain'><!--quotec-->
Turd stefans. When I pulled these out of the pillow case i was just like, what... the... fuck...
Muker
<!--QuoteEnd--></div><!--QuoteEEnd-->

#8 Icespartan 1114

Icespartan 1114

    Do NOT buy/sell with me

  • DO NOT TRADE
  • 934 posts

Posted 07 December 2008 - 05:12 PM

And just for the record, Icespartan_1114 had nothing to do with the barrel system, as he left before it was finished. Modding it "together" was not what happened.
And thanks for the complements Gears.


I had to redo the coupler cause they feel off. To Wes, the coupler is held on with super glue, hot glue, and etape.

Edited by Icespartan_1114, 07 December 2008 - 05:15 PM.

  • 0
QUOTE(Zaxbys @ Mar 2 2009, 02:08 PM) View Post
I won't be there til about 1-2...

Church... gotta soak up that Jesus!


NERFSTRONG #51

#9 mystefansdontflystraight

mystefansdontflystraight

    Member

  • Members
  • 1,176 posts

Posted 07 December 2008 - 06:07 PM

I have modified many guns using this, as us canadians have to switch our barrel material if we plan on nerfing outdoors in the winter. I usually cut the CPVC coupler in half, glue it in the PVC one so the back is flush, and glue that to whatever gun I am using. I have a 2k, a PAS, a NF, and a BBBB modified this way. In other words, nothing really new. GOod job anyways
  • 0
QUOTE(Blacksunshine @ Dec 24 2009, 02:15 PM) View Post

QUOTE(white moonlight @ Dec 23 2009, 01:29 PM) View Post

It's just screaming to be rearloading...

I seen a movie about that once.



#10 Blacksunshine

Blacksunshine

    Member

  • Members
  • 948 posts

Posted 07 December 2008 - 08:07 PM

The coupler will continue to fall off. Whoever was responsible for the mod. Bad choice in adhesives. none will hold up under stress that a coupler will endure with the adding and removal of barrels over time. Try epoxy. Specifically for plastics.
  • 0
Forgive my spelling and grammar. I post from my cell phone a lot. Sometimes when I'm on the can at work.

#11 Icespartan 1114

Icespartan 1114

    Do NOT buy/sell with me

  • DO NOT TRADE
  • 934 posts

Posted 07 December 2008 - 08:13 PM

The coupler will continue to fall off. Whoever was responsible for the mod. Bad choice in adhesives. none will hold up under stress that a coupler will endure with the adding and removal of barrels over time. Try epoxy. Specifically for plastics.


Thanks for the advice, will do when and if it comes off again.
  • 0
QUOTE(Zaxbys @ Mar 2 2009, 02:08 PM) View Post
I won't be there til about 1-2...

Church... gotta soak up that Jesus!


NERFSTRONG #51

#12 shadowkid33

shadowkid33

    Member

  • Members
  • 633 posts

Posted 07 December 2008 - 08:22 PM

The kind of CPVC couplers I use fit perfectly inside a PVC coupler. I just shove a CPVC coupler in the back of a PVC coupler and use that on the gun. It works very well, I think I get the couplers at either Home Depot or ACE hardware, I can't remember (you saw the CPVC coupler in my PVC one at the war last week, didn't you?)
  • 0
QUOTE
how the heck do you make a double clip?

QUOTE
Here are the steps.
1. Go to the search button in the right corner of the screen
2. Click
3. Search double longshot clip.

QUOTE
i dont have time, jeez, im new here!

#13 CaptainSlug

CaptainSlug

    Resident Mad Scientist

  • Administrators
  • 4,763 posts

Posted 07 December 2008 - 08:52 PM

Thanks for over-hyping something everyone does.

For reference

u⋅ni⋅sex
–adjective
1. of, designed, or suitable for both sexes; not distinguishing between male and female; undifferentiated as to sex: unisex clothes.

A coupler cannot be unisex because both ends are female and accept male pipe connections.
If it had a male end and a female end it would be called a pipe adapter.
If it had two male ends it would be called a pipe nipple.
  • 0
The little critters of nature, they don't know that they're ugly. That's very funny, a fly marrying a bumble bee. I told you I'd shoot, but you didn't believe me. Why didn't you believe me?

#14 ice

ice

    Member

  • Members
  • 895 posts

Posted 07 December 2008 - 09:20 PM

Thanks for over-hyping something everyone does.

For reference

u⋅ni⋅sex
–adjective
1. of, designed, or suitable for both sexes; not distinguishing between male and female; undifferentiated as to sex: unisex clothes.

A coupler cannot be unisex because both ends are female and accept male pipe connections.
If it had a male end and a female end it would be called a pipe adapter.
If it had two male ends it would be called a pipe nipple.

So noted, and that was my fault. That's what i told Icespartan it was.
  • 0
<!--quoteo(post=206428:date=Jan 25 2009, 05:17 PM:name=Mukersman)--><div class='quotetop'>QUOTE(Mukersman @ Jan 25 2009, 05:17 PM) View Post</div><div class='quotemain'><!--quotec-->
Turd stefans. When I pulled these out of the pillow case i was just like, what... the... fuck...
Muker
<!--QuoteEnd--></div><!--QuoteEEnd-->

#15 sputnik

sputnik

    Member

  • Members
  • 911 posts

Posted 07 December 2008 - 10:01 PM

Fucking original man.
No way this has ever been done before.
Ever.
  • 0
tcambre on IRC.

<3

#16 Echnalaid

Echnalaid

    Member

  • Members
  • 981 posts

Posted 07 December 2008 - 11:50 PM

Well Mike, a Unisex barrel? Do a Barrel Roll!
This solves the problem of darts not fitting in the winter. My dart fit superb in CPVC, but when it's warmer, PETG is best. I must try on my PAS. When I get it, of course. For Christmas.
  • 0
There was something on the bottom of the ad that said erotyka. Sounds like something spicy -Renegademilitia15

#17 halfway33

halfway33

    Member

  • Members
  • 24 posts

Posted 16 February 2009 - 11:30 PM

Thanks for over-hyping something everyone does.

For reference

uÃ…niÃ…sex
–adjective
1. of, designed, or suitable for both sexes; not distinguishing between male and female; undifferentiated as to sex: unisex clothes.

A coupler cannot be unisex because both ends are female and accept male pipe connections.
If it had a male end and a female end it would be called a pipe adapter.
If it had two male ends it would be called a pipe nipple.

Captian Slug I didn't know you were a dick. ^_^
  • 0
No bastard ever won a war by dying for his country. He won it, by making the other poor dumb bastard die for his country Genral Patton

#18 VACC

VACC

    Vacc is Legend

  • Founders
  • 3,265 posts

Posted 17 February 2009 - 08:08 AM

Captian Slug I didn't know you were a dick. ^_^


And yet we're all completely aware that you are a jackass who posts in 2 month old topics for no particular reason. The Code of Conduct is your guide and salvation. Violating it will lead to revocation of your membership privileges.
  • 0


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users