9 replies to this topic

[orogomi ninja]

When I pull the trigger, it fires slow and the clip refuses to move. Has anyone had this problem? I don't have any pics because I don't know that is wrong !

Also- when its only had 20 pumps it will only fire semi auto.


P.S. I have a war this coming weekend I can't afford to break it.

Edited by orogomi ninja, 07 December 2008 - 01:53 PM.

[xtremejumpy]

Have you taken it apart? There is a trangle little thing on the inside that pushes out air and advances the clip. On the clip advancement there is a little plate that shoots in and out to work. Mine broke off, so that could be a possible component. If its broken, the gun should rattle.

[orogomi ninja]

Have you taken it apart? There is a trangle little thing on the inside that pushes out air and advances the clip. On the clip advancement there is a little plate that shoots in and out to work. Mine broke off, so that could be a possible component. If its broken, the gun should rattle.

No it is not that, I have it apart right now ( this has already been modified). The lift is moving , the clip just isn't. My fiend had a ruined bladder in his, I might be able to swap parts.

[xtremejumpy]

It's all I know, but the clip not moving has something to do with speed right? If you get it fixed pm me because I'm having the same problem with my rapid fire 20

[orogomi ninja]

Have you had to fix the trigger valve for anything?

[xtremejumpy]

No, why?

[Renegademilitia15]

Have you E-taped the clip? Sometimes when you put too much tape on the clip it jams alot.

[orogomi ninja]

I had to repair mine-long story.

There is absolutely do e-tape on it, the clip slides in smoothly.

[Watari]

Ok so lemme get this straight. Your Magstrike is broken and the clip won't advance? If that's the problem then hopefully I can help . This happened to me once and I started a topic about it and someone said to check if all the parts are in the right places. First I didn't believe that person, but then, when I finally opened my Magstrike the plunger thingy wasn't in the right place (the back part wasn't in line with the housing so it wasn't secure). After that short fix, my Magstrike was repaired and it works really well. Hope that helped!

EDIT:
Here's the topic that I started:
http://nerfhaven.com...=Magstrike help

Edited by Watari, 07 December 2008 - 10:13 PM.

[Chuck Norris]

Hmmm...have you checked to make sure that there are no animals in the gun? Ok.......are you pulling the trigger? Interesting....and you're still having the problem....well that's all I can think of
Thank you, and I hope you have enjoyed your experience with our customer support team. If your experience was pleasant, press 1. If it was not, hang up now and tell no one.