this scope will work for any "N-Strike" gun with a rail.

Here is what you need:
Hot glue gun and glue; or epoxy
A Flip-Up sight from the recon.

An Optical "Wonder"

First, take the black sight off the yellow attachment and throw it out. SAVE THE YELLOW PART THAT GOES ON THE RAIL!!!
Just take off one small and big lens from one side of the optical wonder.
Then glue it on like in the first picture of the post. Be sure to use a lot of glue or epoxy so it will stay on firmly. Make sure that the knob is not glued up.
Be sure to let the back hang off so you can control the zoom of the scope. To zoom in, just turn knob left. To zoom out turn the knob right.


Thank You for viewing my post. Please feel free to leave comments, questions, or advice. I am open to them.