The Gun itself is from the Video game Gears of War, you essenially saw bad guys apart in between shooting. Its very practical during a nerf war because of the barrel mod, even tough its akward to have a bloody looking piece o' cardboard
on a longshot.
Materials:
Longshot [duh]
Chrome/silver paint
Chaos Black paint
Blood Red Paint
screwdriver
medium sized wad of clay
large piece of cardboard
Two small rings of PVC
Glue [prefferably Tacky]
P1010031.JPG
Step 1. stensil out the shape of the chainsaw. make it however you like but just make sure it can be glued to the front and undercarriage of the gun. You dont have to remove the bipod because it looks weird with out it.
Step 2. Remove the gun's shoulder stock.
Step 3. Cut out [remember teeth on the chainsaw] and apply generous amounts of glue to where it connects with the gun.
Step 4. Using the Hacksaw remove the rail on top of the gun. You might want to use something to sandwich it between to
stabilize your cut.
Step. 5 Apply a thin base coat of chaos black to the frame of the gun and let sit for a while. After that put on a scattered layer of chrome. Quickly wipe away w/ paper towels some of the paint so it has a varnished gunmetal finish. Lightly go over the words on the gun with the silver and it'll look really cool
Step 6. Paint the cardboard chainsaw Black and let it sit to dry. Use the Red paint to make it look like blood splatters. You might also want to carry a bit of red up to the gun so it looks like the blood spattered.
Step 7. Unscrew the front part of the gun and remove the barrel and the stopper. Unscrew the Front gun and remove it's barrel and place it in the Main gun. Use the clay to surround the barrel and stop it from sliding out of the gun. Glue the Rings of PVC onto the Front and the second nubbin where the rail used to be
U should let the gun sit over night and dry. When you wake up you'll have a shiny new LANCER!!
Edited by lonshotparty, 23 December 2008 - 04:05 PM.