I recently noticed A hissing noise below the handle of my Magstrike. Has any one had this problem before? I have plumber's goop on the bladder as well as hose clamps and the stock clamps (the hose clamps overlap the original clamps).
Any suggestions? Thanks Guys!
7 replies to this topic
#1
orogomi ninja
-
- Members
- 95 posts
Member
Posted 03 December 2008 - 05:08 PM
QUOTE(Blacksunshine @ Dec 23 2008, 06:18 PM) 
Thats the way I do it. Use a rag with some light fast rubbing.
Sometimes I hate my uncontrollable imagination....
#2
maseman 46
-
- Members
- 96 posts
Member
Posted 03 December 2008 - 05:20 PM
Ok well what I would suggest is that you take everything out, soak it in warm soapy water, then locate the leak and seal it.
The only way to get a recon over 100' would be to throw it.-atomatron
Yes groove punching your mother solves all problems......Maybe George Bush should have done that during katrina?-foxdemon82
My sales thread
Yes groove punching your mother solves all problems......Maybe George Bush should have done that during katrina?-foxdemon82
My sales thread
#3
orogomi ninja
-
- Members
- 95 posts
Member
Posted 03 December 2008 - 05:22 PM
Won't my gun then fill with water?
QUOTE(Blacksunshine @ Dec 23 2008, 06:18 PM)
Thats the way I do it. Use a rag with some light fast rubbing.
Sometimes I hate my uncontrollable imagination....
#4
maseman 46
-
- Members
- 96 posts
Member
Posted 03 December 2008 - 05:28 PM
Not if you take everything out, then afterwards just glue the trigger back in.
The only way to get a recon over 100' would be to throw it.-atomatron
Yes groove punching your mother solves all problems......Maybe George Bush should have done that during katrina?-foxdemon82
My sales thread
Yes groove punching your mother solves all problems......Maybe George Bush should have done that during katrina?-foxdemon82
My sales thread
#5
sputnik
-
- Members
- 911 posts
Member
Posted 03 December 2008 - 05:30 PM
Don't listen to maseman.
Ever.
Does it hiss while you are pumping?
Or after you have fully pumped it?
Ever.
Does it hiss while you are pumping?
Or after you have fully pumped it?
tcambre on IRC.
<3
<3
#6
orogomi ninja
-
- Members
- 95 posts
Member
Posted 03 December 2008 - 05:53 PM
I found the problem, it was the hose connecting the bladder and the trigger. I found it by just opening the gun, It fell right off. It did it after I had pumped less that 10 times.
QUOTE(Blacksunshine @ Dec 23 2008, 06:18 PM)
Thats the way I do it. Use a rag with some light fast rubbing.
Sometimes I hate my uncontrollable imagination....
#7
TantumBull
-
- Moderators
- 1,929 posts
Member
Posted 03 December 2008 - 06:10 PM
I found the problem, it was the hose connecting the bladder and the trigger. I found it by just opening the gun, It fell right off. It did it after I had pumped less that 10 times.
Was it the iron man one? The one I bought from value village had the same problem. I just drilled a hole into the bladder cap where the broken fitting was, and glued the tubing directly into there.
#8
orogomi ninja
-
- Members
- 95 posts
Member
Posted 03 December 2008 - 06:20 PM
Yup Yup Yup, Exactly. I just got done doing that. Thanks for the help guys!
QUOTE(Blacksunshine @ Dec 23 2008, 06:18 PM)
Thats the way I do it. Use a rag with some light fast rubbing.
Sometimes I hate my uncontrollable imagination....
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
