I am going to start off by showing you an example of my latest production (has been tested) and it works so im hoping my first contribution will be something to remember here on NerfHaven.
This invention i would like to introduce as.. The MagBreech (breech with simple homemade magazine)
( i use homemade mega darts ((5/8ths Fbr used in side 1/2 in thickwalled PVC/Cpvc)))
the black = PVC/CPVC Breech
the brown = Cardboard box (can be substituted with a plastic idk where to get one so i used cardboard)
the yellow = Rubber bands
Blue = metal rod (from broken maverick barrel)
Lightblue =air flow
Gray = Stefan Dart (5/8ths FBR)
THE GIANT BLACK BLOCKS ARE THE EMPTY HOLE FOR THE BREECH OR HOLES
THE IMAGE TO THE LOWER RIGHT IS A SIDE VIEW OF THE MAGAZINE
Functions of the breech:
-Loads ONE dart into the barrel by pumping the breech like a shotgun (the breech and barrel is held in by Goop, Epoxy, ETC)
-The breech cover is cut down to the size enough to pull it back all the way and load the one dart in, therefore not having to over pump or over thrust the breech barrel
-The darts are held within the MAG by a metal rod or wooden block pulled up by Rubber Bands
-Dart is fired off by compressed air within an air chamber...
NOTE THAT THIS BREECH IS MADE FOR HOMEMADES THAT CAN FIRE OFF TO 100+ Feet RECOMMENDED THAT THIS IS USED FOR AIR POWERED HOMEMADES
-To reload, simply take the cardboard box and reload the box to the top with darts (MAKE SURE YOU KEEP THE WOODEN BLOCK OR METAL ROD INSIDE THE BOX WHILE RELOADING)
-Carefully place the box underneath the hole of the breech COVER (outside of barrel) and add 1 rubber band on each side of the box, insert rubber band over the breech barrel and over the metal rod that sticks out of the box as shown in the figure
I am very sorry for not posting a REAL picture its only because i dont have any pictures of the item let alone had the thought id ever be validated till today! yay!!!
IDK if it worked so ill add this too
<a href="http://img151.images...gbreechik5.png" target="_blank"><img src="http://img151.images...eechik5.th.png" border="0" alt="Free Image Hosting at www.ImageShack.us" /></a><br /><br /><a href="http://img604.images...gbreechik5.png" title="QuickPost"><img src="http://imageshack.us...mg/butansn.png" alt="QuickPost" border="0"></a> Quickpost this image to Myspace, Digg, Facebook, and others!
sorry im new at this so im very sorry if the pictures horrible... i need tips on uploading if any can be offer then many thanks!
Since Rubber bands are very cheap no mater what size.. it'll be very easy to replace the rubber bands
nothing to latch the clip onto (that may be a problem... gotta fix that)
I was hoping the rubber bands would do it... Until then i will be editing this idea this was a fresh idea i had just a week ago
Edited by OnyxZenith, 02 December 2008 - 10:19 PM.