#1
Posted 01 December 2008 - 04:51 PM
Any suggestions?
sorry for being a n00b
thx
#2
Posted 01 December 2008 - 04:54 PM
http://nerfhaven.com...?act=boardrules
http://nerfhaven.com...50&hl=directory
Edited by Icespartan_1114, 01 December 2008 - 05:00 PM.
Church... gotta soak up that Jesus!
NERFSTRONG #51
#3
Posted 01 December 2008 - 05:00 PM
-Eric Hoffer (1902-1983)
Rabbit + Hunting Bullet from a hunting rifle = exploded rabbit
#4
Posted 01 December 2008 - 05:03 PM
Nerf Rocket Air Launcher
#5
Posted 01 December 2008 - 05:08 PM
I tried a string but i didn't pull it back enough.
#6
Posted 01 December 2008 - 05:10 PM
Any suggestions?
Yes, fix your fucking grammar. Is it impossible to hit the Shift Key before hitting the "i" key?
#7
Posted 01 December 2008 - 05:12 PM
Thread the zip tie through the slot in the case.
Make sure the the zip tie is in front of the hook shaped piece on the plunger.
Once it is secure, lock the zip tie onto itself.
*Optional-use vinyl tubing to cover the exposed zip tie.
Hope I helped.
<3
#8
Posted 01 December 2008 - 05:14 PM
Then pull it back some more!I tried a string but i didn't pull it back enough.
What exactly are you not understanding? Where are you in the minimization? Might it not be cocking due to a broken cache? I doubt the last one
Pictures do worlds of help, even more when there's explanations with them. Give us some more info and we'll see what we can do to help.
FOAMalicious!
DARTomatic!
#9
Posted 01 December 2008 - 05:24 PM
Then pull it back some more!I tried a string but i didn't pull it back enough.
What exactly are you not understanding? Where are you in the minimization? Might it not be cocking due to a broken cache? I doubt the last one
Pictures do worlds of help, even more when there's explanations with them. Give us some more info and we'll see what we can do to help.
Sorry I'm not very good with computers, I have no clue how to get pictures in here, but i know that I am at the end of the Cutdown/Minimization mod. I think the string i was using was to flexible. I'm going to try a thicker one.
Thanks sputnik, you helped a lot.
#10
Posted 01 December 2008 - 05:35 PM
Venom: Haven't we all?
#11
Posted 01 December 2008 - 05:44 PM
Thanks sputnik, you helped a lot.
You're welcome.
<3
#12
Posted 01 December 2008 - 05:52 PM
That's a really good idea. How hard is it to cock? When I put on the zip tie it's pretty hard to cock.I took picture wire, cut little slits in the chunk of plastic that comes up to grab the bar on the slider, wrapped that around a few times, secured it, then I drilled a hole in the back, treaded that through then used a keyring, so mine cocks with a keyring now. Hope that helps.
Edited by JATDO, 01 December 2008 - 05:52 PM.
#13
Posted 01 December 2008 - 06:14 PM
I can cock it by snagging it on the hooks on my SNAP. Its pretty easy to cock, and it makes in PERFECT for a holster.That's a really good idea. How hard is it to cock? When I put on the zip tie it's pretty hard to cock.I took picture wire, cut little slits in the chunk of plastic that comes up to grab the bar on the slider, wrapped that around a few times, secured it, then I drilled a hole in the back, treaded that through then used a keyring, so mine cocks with a keyring now. Hope that helps.
Venom: Haven't we all?
#14
Posted 01 December 2008 - 06:46 PM
#15
Posted 01 December 2008 - 07:42 PM
Oh and CrazyIvan VI I can get my single zip tie to work I just have to hold it a bit.
#16
Posted 01 December 2008 - 09:22 PM
If you are part of the 8% who still listen to "real music",
copy and paste this into your signature
#17
Posted 01 December 2008 - 09:56 PM
As you have been told and i have to but the BEST way to stay here is to STOP the AIM talk it is a lot worse then poor spelling.
He has already been told that, and has already stopped speaking in aim talk. His replies are now fairly grammatically correct. The same cannot be said about your replies. Please don't try to scold people for using bad grammar if your grammar is just as bad or worse.
I just picked up a crossfire about a week ago. Don't know why on earth you would take the slider off. The gun seems so naked without it. It has a similar plunger system as the maverick. What I did for my mav is I used the metal tube that goes up the turret. I trimmed it down to size, and used the same pieces that normally hold it on the turret to fasten it to the bolt slot. It even works with the extention spring, and goes back forward so it doesn't get in the path of the plunger.
I have pics if that didn't explain enough.
Just another idea if you have a spare maverick.
If at first you don't succeed, add more epoxy.
#18
Posted 02 December 2008 - 10:33 PM
He has already been told that, and has already stopped speaking in aim talk. His replies are now fairly grammatically correct. The same cannot be said about your replies. Please don't try to scold people for using bad grammar if your grammar is just as bad or worse.
I just picked up a crossfire about a week ago. Don't know why on earth you would take the slider off. The gun seems so naked without it. It has a similar plunger system as the maverick. What I did for my mav is I used the metal tube that goes up the turret. I trimmed it down to size, and used the same pieces that normally hold it on the turret to fasten it to the bolt slot. It even works with the extention spring, and goes back forward so it doesn't get in the path of the plunger.
I have pics if that didn't explain enough.
Just another idea if you have a spare maverick.
I know what your talking about when you say that the Crossfire looks naked without the slide. When I took off the slide I did it so that it could be easily holstered or hidden. I got the two pack so I have another one that i will keep the slide on.
What you did to your Crossfire sounds really cool, but I am really confused about what you did. I have a spare mav, do you think you could post some pictures?
Oh and thanks for backing me up.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users