Ar Removed Made It Worse?
#1
Posted 26 November 2008 - 06:36 PM
#2
Posted 26 November 2008 - 06:42 PM
Hey guys I was wondering if I removed the AR in my longshot the wrong way becasue the darts go about 30ft flat. 20ft with stefans. What I did was I opened the gun removed the plunger then used neddle-nose pliars to grap one of the little grooves on the piece that covers the AR then I yanked it out. I then broke the limiter stick off with a flat head screw-driver. If someone knows what I did wrong then please tell.
There might be a bit of the AR stuck in the tube. you also might have dented the tube with a screwdriver, making a worse seal. I kind of hate the LS since the best I could do with mine was sub-par for my taste (and I tried hard).
If at first you don't succeed, add more epoxy.
#3
Posted 26 November 2008 - 06:44 PM
#4
Posted 26 November 2008 - 06:58 PM
#5
Posted 26 November 2008 - 07:38 PM
#6
Posted 26 November 2008 - 07:57 PM
#7
Posted 26 November 2008 - 08:02 PM
5. Protip: sarcasm is good for making someone else look like more of an idiot than they already do. However, if you are an idiot to start with, using sarcasm just makes you look like a COLOSSAL idiot.
#8
Posted 26 November 2008 - 10:06 PM
I'm amazing at Forza3! I destroyed the engine of a 2mil C car by downshifting! YAY!
I hate you. And all noobs who are like "OMFG i r liek, glued sh1t 2 shit. jak offf ma ego. NAOW!"
#9
Posted 27 November 2008 - 01:10 PM
can you see all the way through the barrel to the plunger head?Hey guys I was wondering if I removed the AR in my longshot the wrong way becasue the darts go about 30ft flat. 20ft with stefans. What I did was I opened the gun removed the plunger then used neddle-nose pliars to grap one of the little grooves on the piece that covers the AR then I yanked it out. I then broke the limiter stick off with a flat head screw-driver. If someone knows what I did wrong then please tell.
#10
Posted 27 November 2008 - 07:27 PM
I bet your darts are CRAPHey guys I was wondering if I removed the AR in my longshot the wrong way becasue the darts go about 30ft flat. 20ft with stefans. What I did was I opened the gun removed the plunger then used neddle-nose pliars to grap one of the little grooves on the piece that covers the AR then I yanked it out. I then broke the limiter stick off with a flat head screw-driver. If someone knows what I did wrong then please tell.
#11
Posted 27 November 2008 - 09:00 PM
Nightfinder: I got the darts from Blacksunshine talk to him if you think my darts are crap.
Just Some Bob, Zach Koukios: yes I can see all the way through the barrel. I can see the plunger head if I look down the barrel. The whole middle section where the AR is supposed to be is gone. I yanked it out.
Moon Master: Ya there is a hole in the side of the barrel I think I'll try to plug it.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users