Jump to content


Photo

Clone Trooper Blaster With Vacuum Loading

Nerf mod for the clone trooper blaster

11 replies to this topic

#1 Redmark

Redmark

    Member

  • Members
  • 39 posts

Posted 18 November 2008 - 03:30 PM

Posted Image

I've finally decided to do a write up. The gun you see above is what I will be working with.


Materials:
1) Screw Driver
2) Electrical Tape
3) JB Weld
4) 1 Dremel with a 1/2" Sanding Drum Mandrel
5) Strong Scissors
6) Acrylic Tubing or whatever you want to use
7) Hack Saw (I used a miracle blade)







Okay, please don't bash me. I'm very new to this and I've been browsing around the site for a few months.
I didn't want to jump right into a write up for all my mods. So with that being said, lets get started.



STEP1.
First, you will need to remove all the screws in this gun.(Including the screw that's behind the blaster and holds the battery cover.
Posted Image


STEP2.
On the very end of the blaster, you will find a circular orange piece. I simply pulled apart the blaster in opposite directions until the ends are free from this part.( Or you can cut it off)
Posted Image

Here is a look of the internals:
Posted Image

STEP3.
Take the plunger and remove the stock barrel. When you cut the barrel off, it should look like this:
Posted Image
Posted Image
Now take your dremel and clean up the hole until your barrel fits. Remember you don't want your hole too loose or it will fall in the plunger. If it is, take some electrical tape and wrap your tube until it is snug enough so that it is tight and centered.

Posted Image
Posted Image

STEP4.
Take your JB weld and spread it across the plunger and electric tape. The reason for that is to make sure it's
air tight. Now let the JB weld cure over night and wrap it with more tape.


STEP5.
Cut the unnecessary tube you have left over. Since I used 1" half inch arcrylic tubing I cut 9 and a half inches off.

STEP6.
Slightly stretch the spring. If you stretch it too, much it wont fit in the plunger tube and this mod will be useless.

STEP7.
Put the gun back together and before you screw it, make sure your cocking handle cocks the gun.(Trust me)

STEP8.
Tape the gun's front part with electrical tape so it won't come apart. I also taped the barrel tubing.
Posted Image

STEP9.
Place a stefan slight'y in the barrel and cock it.

STEP10.
Be amazed. Ahahahaha.


Description of the blaster: http://nerfhq.com/wi...Trooper_Blaster



A VIDEO of it in action. http://s88.photobuck...nt=HPIM0645.flv

Edited by Redmark, 02 December 2008 - 12:28 AM.

  • 0
Non-Expanding Recreational Foam

#2 Kid Flash

Kid Flash

    Member

  • Members
  • 1,985 posts

Posted 18 November 2008 - 04:35 PM

ok
  • 0

#3 cheesypiza001

cheesypiza001

    Member

  • Members
  • 752 posts

Posted 18 November 2008 - 04:42 PM

STEP1.
You will first need to remove all the screws in this gun.(Including the screw that is behind the blaster hold the batterie cover.


That's your complete writeup?

Im gonna guess that something happened and you could not finish the writeup, but you still posted it. I guess this because you included tools and materials such as a dremel, acrylic tubing, and strong scissors, and yet none of these objects were mentioned in the actual writeup part.

Also, you might want to fix some of your grammar and spelling (ie: "behind the blaster hold the batterie cover", and "batterie")

Edited by cheesypiza001, 18 November 2008 - 04:49 PM.

  • 0

#4 deadshooter711

deadshooter711

    Member

  • Members
  • 329 posts

Posted 18 November 2008 - 04:43 PM

You're going to need a LOT more than that.

Unless you're doing the mod as you go along.....

Edited by deadshooter711, 18 November 2008 - 05:17 PM.

  • 0

My Nerf War Pictures

IT'S EVERYWHERE!


#5 najmodder0424

najmodder0424

    Member

  • Banned
  • 112 posts

Posted 18 November 2008 - 05:00 PM

We won't understand the mod unless you give us a WHOLE and COMPLETE write-up. One step isn't enough for us to understand what you did to the gun.
You can discover what your enemy fears most by observing the means he uses to frighten you.

-Eric Hoffer (1902-1983)

Rabbit + Hunting Bullet from a hunting rifle = exploded rabbit

#6 Shadowblade

Shadowblade

    Member

  • Members
  • 404 posts

Posted 18 November 2008 - 05:05 PM

Alright, I see you finished the post. Very clean write-up.

Edited by Shadowblade, 19 November 2008 - 08:06 PM.

  • 0
QUOTE
Proverbs says, "The wise man doth not shoot the Viking in the ding ding for he shall pummel thee."

But you can totally shoot Vacc there, he loves it!

~Talio

#7 Quilan Fett

Quilan Fett

    Member

  • Members
  • 678 posts

Posted 18 November 2008 - 06:40 PM

Calm down, he probably just hit post instead of preview.
  • 0
SNAP Shotgun


This guy can see the future!

QUOTE(pokemaster @ Mar 3 2009, 04:18 PM) View Post

hasbro in a nerf war!!!!! dude the will cancel it and confinscate are guns

#8 Accord

Accord

    Member

  • Banned
  • 141 posts

Posted 18 November 2008 - 07:35 PM

haha KEEP IT UP dude

I'll be looking for the finished version of this guide. SHIT, I remember trying to figure out my first mod back in high school with some buddies. Good times man

#9 cheesypiza001

cheesypiza001

    Member

  • Members
  • 752 posts

Posted 18 November 2008 - 09:45 PM

Nice mod. It would be a bit easier to see and understand the gun if your internals picture featured a descent picture of the plunger, the spring, and the catch.

Ranges?

Edited by cheesypiza001, 18 November 2008 - 10:27 PM.

  • 0

#10 Redmark

Redmark

    Member

  • Members
  • 39 posts

Posted 18 November 2008 - 09:50 PM

Stock: Too bad to mention
Modded: approximately 40+
  • 0
Non-Expanding Recreational Foam

#11 Noodleownz

Noodleownz

    Self-Fondler

  • Members
  • 510 posts

Posted 18 November 2008 - 10:12 PM

Good job Redmark. Nice pictures and easy to read. I always pass these in Target, and thanks to your mod, I just might have to pick one up. :ph34r:
  • 0
It's Nerf or Nothin'!

#12 Lion

Lion

    Member

  • Members
  • 244 posts

Posted 18 November 2008 - 10:46 PM

STEP6.
Slighty Stretch the spring. If you stretch it too much it wont fit in the plunger tube and this mod will be useless.




Never stretch the spring, it will work better for a little bit, till it gets worse then when you started.
  • 0


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users