3 replies to this topic

[Icespartan 1114]

Ok, as some of you may know I made a new topic looking for an Lock N' Load trigger. I didn't really know what the problem was back then but now I do know. My trigger snapped.


As you can see in that picture shown above there is a piece cracked off the top part of the trigger. That is the piece that allows the catch plate to move upwards then fire the gun. So what I am asking is if anyone knows how I could repair the problem.

[TheNerfLoki]

There was a topic on repairing lnl triggers and ls boltsleds. I will see if I can find it for you.
Edit: Actually it was the plunger rod. But same idea.Linky

Edited by TheNerfLoki, 15 November 2008 - 05:07 PM.

[Natbeanz]

I would putty it up, put the catch where it needs to go and smuther a generous amount of Eputty on. Or hot glue, but it most proberly won't hold as well.

[Blue]

The broken piece looks quite small, why don't you just super glue it in place and see how it does for a while. Or maybe replace it with a stronger material if it can't take the stress.