12 replies to this topic

[nightfinder]

Hey guys i was wondering how you would work do it?
Because the PVC isn't fitting INSIDE the chamber, sorry if i am being Sir.Noobalot

[Wes7143]

Hey guys i was wondering how you would work do it?
Because the PVC isn't fitting INSIDE the chamber, sorry if i am being Sir.Noobalot

Fix up your grammar.
Tell us EXACTLY what your asking.
And try searching, because a PVC LS has been done before.

[nightfinder]

Hey guys i was wondering how you would work do it?
Because the PVC isn't fitting INSIDE the chamber, sorry if i am being Sir.Noobalot

Fix up your grammar.
Tell us EXACTLY what your asking.
And try searching, because a PVC LS has been done before.

I serched.Nothing

As for my grammar i fell asleap at 4 in the morning and woke up at 6, My grammar isn't always going to be great

Hey guys i was wondering how you would work do it?
Because the PVC isn't fitting INSIDE the chamber, sorry if i am being Sir.Noobalot

This is what im trying to do;
I am going to replace the barrel with PVC and i dont know how it's going to go into the chamber.
Oh by the way im not making a singled LS

[s3an967]

The problem is your using PVC Ice used CPVC which slips nicely into the plunger tube and the dart chamber.

[nightfinder]

The problem is your using PVC Ice used CPVC which slips nicely into the plunger tube and the dart chamber.

Oh, so 3/4 CPVC would work?

[Kid Flash]

No. 1/2 inch cpvc will though.

[s3an967]

It's half inch CPVC but you'll need to dremel both chambers and use PVC if you half big stefans

Edited by s3an967, 09 November 2008 - 02:07 PM.

[nightfinder]

It's half inch CPVC but you'll need to dremel both chambers and use PVC if you half big stefans

For this LS im using streamlines

[Wes7143]

It's half inch CPVC but you'll need to dremel both chambers and use PVC if you half big stefans

For this LS im using streamlines

Then why the hell are you changing to PVC? Stock barrels fit stock darts. And which barrel are you changing: the front or back?

As for you saying your grammar won't always be great: Read over your messages and capitalize properly. If your too lazy, then get a newer internet application like Google chrome, which underlines all of your misspelled words with red. I'm not trying to be an ass or anything, but I've seen quite a few people get banned because they refused to fix their grammar.

Edited by Wes7143, 09 November 2008 - 02:30 PM.

[AJZ]

I think the reasonable answer is to not do anything at all. Unless you want to improve range, don't use PVC and use brass or PETG and create a new breech. 3/4" PVC will make the range much worse

[rork]

Wes: stock barrels do not actually fit stock darts all the time; the LS barrel is cosmetic, which is one of the reasons it sucks. Replacing the barrel with something tighter should improve performance considerably. Also: Streamlines suck. Nightfinder: this topic is useless. If you'd actually bothered to go to the STICKIED mod directory and do your own fucking research, none of us would be involved in this little orgy of correction. /Thread

[death by cheez]

Please ignore this.

Edited by death by cheez, 09 November 2008 - 05:01 PM.

[Hoceky]

I agree with what rork said. Can we just get an admin to close this and get on with our lives?