7 replies to this topic

[nerfer9]

Ok, so I just got a ERTL shotgun, but unfortunately, the stock is too short, its really hard to aim. I searched, and found nothing. But has anyone designed one?

[CROW]

This is an idea off the top of my head, but you could try a stock extension. What I mean by that is that would you take the stock and cut it in two (Not along the seam of the gun) Then you would put plates over the gaping holes you created, then put spaces bewteen the plates, making the stock longer

EDIT- Ugh, I hade a good picture going made out of keyborad symbols to show what I meant, but the site keeps scrambling it...

Edited by CROW, 30 October 2008 - 01:20 AM.

[Mr BadWrench]

http://www.thegreath...1755&click=2744

[nerfer9]

Just Some Bob, on Oct 30 2008, 01:25 AM, said:

Mr BadWrench, on Oct 30 2008, 01:11 AM, said:

{universal slip-on recoil pad}

I suspect that's not as "universal" as one might hope. As gun butts go, this baby is ... a baby.
But it's the right idea.

Yea....I really don't think that would even fit on my 410. shotgun.

[1313]

Tape a brick on the end to increase length. I bet your .410s pretty pimp.

[nerfer9]

1313, on Oct 30 2008, 05:20 PM, said:

Tape a brick on the end to increase length. I bet your .410s pretty pimp.

Um.....I don't need my gun to weigh 10 pounds more....

[mystefansdontflystraight]

I have seen a pistol style pump shotty, with the stock sawn off. Do that, and then make a larger one out of CPVC. Shouldn't be too hard. I am considering doing this with mine.

[k9turrent]

mystefansdontflystraight, on Oct 30 2008, 08:57 PM, said:

I have seen a pistol style pump shotty, with the stock sawn off. Do that, and then make a larger one out of CPVC. Shouldn't be too hard. I am considering doing this with mine.

LIKE THIS? (only the stock is made of pvc)

Edited by k9turrent, 30 October 2008 - 08:02 PM.