Here it is:
You will need :
A Nerf Titan
Drill
Screwdriver
Toy lightsaber(cheap one at Rite aid will do the trick)
toilet paper holder bar
e-tape
Step 1: Remove a/r from titan
http://i456.photobuc...itan-mod-12.jpg
Step 2: Remove the two smallest parts of the blade from the lightsaber
cut the nub of the end of the smallest part so you have an empty tube.
Step 3: Take the Smaller end off the toilet paper thing, and don't break it. YOU NEED IT! biggrin.gif
Step 4: put the smallest half of the toilet paper thing ofer blade part one for a sng fit. tape them to gether to make it airtight. It should look life the bottom tube in the picture.
Step five make sure blade part two will fit over the white piece snuggly.
Step 5: Place dart in here
Step 6: put blade piece two over the main part ( toilet paper thing and blade one piece.)
Step 7: put the smallest end in your titan.
It is completely airtight.
2o pumps=50 feet
4o pumps= 75 feet
5o pumps= 130 feet
the small end of blade piece two will fit your recon or longshot snugly and gives it about 10 extra feet of range.
Edited by amerikanidiot154, 22 October 2008 - 02:39 PM.