Stuff you need:
a 5 gum box - preferably new
duct tape
scissors
about 15 minutes
the first and most obvious step-remove the gum

the next step is to remove the front of the box

remove the gum holders (i was lucky enough to only have 1 that was glued in)

remove the sides

remove the cover

cut down on the front of the box - the cut mark should be slightly shorter than the tip of your dart

cut off the top section of the cover -make the cut slightly above the tip of your dart

attach two pieces of duct tape together, and stick those on the underside of the front piece

attach the duct tape to the underside of the lid

cover over the tape with a reverse layer of tape

connect the parts and trim down the sides

cover the side openings with duct tape and cover that over with a revers layer


the finished product

Note: for this one, I just made it big enough for four, but if you add on more duct tape, you can make it bigger.








