Jump to content


Photo

Crossfire Help.

A little help please.

10 replies to this topic

#1 silentsnipe

silentsnipe

    Member

  • Members
  • 377 posts
  • Location:portland,oregon.

Posted 27 September 2008 - 11:28 PM

This is my first time modding a crossfire. I opened my gun up and took out the AR's. When I put it back together it worked exactly the same. The weird thing is that when I shoot it, it is now very quiet. I can't hear a thing. Maybe I left something out? Or put something in wrong? Here is a picture of it.

Posted Image

And here is a piece that fell out when I opened it up.

Posted Image

I don't know if that is a important piece.
I also don't know why it work's exactly the same.
Shouldn't work better then before?

Please, help me.

Thanks for your time.
  • 0
QUOTE
And it's absolutely rated R for the violence. Also boobies. And pee pees.

Talio.


Join TheNerfFreaks.forumotion.com TODAY!

#2 Echnalaid

Echnalaid

    Member

  • Members
  • 981 posts
  • Location:East Brunswick, NJ

Posted 27 September 2008 - 11:42 PM

Try sawing off a cm off the end of the plunger head(Provided you didn't cut anything yet). Then wrap in 2 layers of Painter's tape.It should be working, as that's how mine's done.
  • 0
There was something on the bottom of the ad that said erotyka. Sounds like something spicy -Renegademilitia15

#3 silentsnipe

silentsnipe

    Member

  • Members
  • 377 posts
  • Location:portland,oregon.

Posted 27 September 2008 - 11:44 PM

Try sawing off a cm off the end of the plunger head(Provided you didn't cut anything yet). Then wrap in 2 layers of Painter's tape.It should be working, as that's how mine's done.

That was a little confusing. :)
  • 0
QUOTE
And it's absolutely rated R for the violence. Also boobies. And pee pees.

Talio.


Join TheNerfFreaks.forumotion.com TODAY!

#4 laxtk88

laxtk88

    Member

  • Members
  • 189 posts
  • Location:Merrimack, New Hampshire
  • State:New Hampshire
  • Country:United States

Posted 28 September 2008 - 12:00 AM

Nothing looks wrong to me. Try adding a spring and fixing the seal and see if that works.

Edit: could you take a picture from the side of the orange piece? I think it may be the small bit in the base of the handle that lets you put a clip/carabineer on the blaster.

Edited by laxtk88, 28 September 2008 - 12:04 AM.

  • 0
QUOTE(Sleebo @ Jun 12 2008, 07:23 PM) View Post

Just for the record, my mother is the most beautiful women in the world.

#5 silentsnipe

silentsnipe

    Member

  • Members
  • 377 posts
  • Location:portland,oregon.

Posted 28 September 2008 - 12:05 AM

Nothing looks wrong to me. Try adding a spring and fixing the seal and see if that works.

What spring should I add?
  • 0
QUOTE
And it's absolutely rated R for the violence. Also boobies. And pee pees.

Talio.


Join TheNerfFreaks.forumotion.com TODAY!

#6 Bullshit Dragon

Bullshit Dragon

    Member

  • Members
  • 449 posts
  • Location:Brooklyn Park, Minnesota (55445)

Posted 28 September 2008 - 12:12 AM

If the fact that it's being quiet isn't affecting ranges, I wouldn't bother with it.
  • 0
Gimme back my bullets....

#7 Retiate

Retiate

    Member

  • Members
  • 778 posts
  • Location:Gig Harbor, Washington
  • State:Washington
  • Country:United States

Posted 28 September 2008 - 12:12 AM

That orange piece goes in the bottom corner of the handle.
My Crossfires are real quiet too. The only noise I can really hear from them is a little pop the dart makes when it leaves the barrel. The reason it's working about the same is because the AR doesn't do a whole lot in this gun. It has a low air output to begin with, so the AR doesn't really have a whole lot of air to block off.

You can improve the ranges of it a by doing a few things. First, you can remove the O-ring, clean off the area it was sitting on, add a strip of e-tape that fits in that seat, then put the O-ring back in. Add lubricant after that.
Also, you can glue a couple pennies to the spring wall. I think I used like 2 or 3. A barrel replacement is always a good idea too.
  • 0

#8 laxtk88

laxtk88

    Member

  • Members
  • 189 posts
  • Location:Merrimack, New Hampshire
  • State:New Hampshire
  • Country:United States

Posted 28 September 2008 - 12:18 AM

What spring should I add?


I used a maverick spring in mine.
  • 0
QUOTE(Sleebo @ Jun 12 2008, 07:23 PM) View Post

Just for the record, my mother is the most beautiful women in the world.

#9 Banshee

Banshee

    Member

  • Members
  • 668 posts
  • Location:Chandler, Arizona

Posted 28 September 2008 - 01:36 AM

Yeah, I sawed off the whole barrel up to the o-ring, then put on a crayola barrel and I'm getting around 50' with mine. It was super quiet and made these little ping noises when I shot it. Then I made a silencer and I can't here a single thing.
  • 0
Like my page on Facebook! PM me, I do commissions!

#10 Red Star

Red Star

    Member

  • Members
  • 159 posts
  • Location:St. Helens, Oregon
  • State:Oregon
  • Country:United States

Posted 28 September 2008 - 03:52 PM

Firefly Spring is your best bet. It works well for me, I'm dropping about 45's(Last time I checked) But be careful I broke My Crossfire with that Spring =P It lasted me about 4 months though.

Still worth it =P
  • 0
Red Star's Big Rad Bow W/ Red Star Breech
The Red Star Breech

Xbox Live- IS2DI RedStar Add me if your up for some games

#11 silentsnipe

silentsnipe

    Member

  • Members
  • 377 posts
  • Location:portland,oregon.

Posted 28 September 2008 - 05:57 PM

I think I'll
Stick with the
Maverick spring.
  • 0
QUOTE
And it's absolutely rated R for the violence. Also boobies. And pee pees.

Talio.


Join TheNerfFreaks.forumotion.com TODAY!


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users