19 replies to this topic

[silentsnipe]

Ok, well I lost half of my cocker on my maverick. I wanted to know if there is a homeade cocker somebody made for the maverick?

Thanks, for you time.

[Echnalaid]

Ok, well I lost half of my cocker on my maverick.

added that hilarious quote to my signature, while playing with my butthole. And there's no homemade slider to my knowledge. You can try to use a metal rod for a bolt, maybe.

[silentsnipe]

Ok, well I lost half of my cocker on my maverick.

added that hilarious quote to my signature, while playing with my butthole. And there's no homemade slider to my knowledge. You can try to use a metal rod for a bolt, maybe.

Ok, thanks, i'll try that.

[Blue]

There's a mod for a broken cocking handle thing in the directory. You could do that with scrap plastic or something.

[Nerfassassin]

Is this what you were looking for.

[NerfCrazy]

Nerfassassin beat me to it.

Edited by NerfCrazy, 26 September 2008 - 06:17 PM.

[Bomberman]

Ok, well I lost half of my cocker on my maverick.

added that hilarious quote to my signature, while playing with my butthole. And there's no homemade slider to my knowledge. You can try to use a metal rod for a bolt, maybe.

This may be what you are looking for.

NerfCrazy, Blue just posted that.
And Echnalaid, that sig isn't what he said. Although funny...
Anyway, silentsnipe, this is easily fixable. It happens on guns like this. (i.e., CrossFire(or strikefire, whatever), Scout, and the Firefly.)

[silentsnipe]

Thanks, for the help guys.But, i'm missing one of two halfs of the cocker. The long metal piece that cock's the gun I still have.

[Banshee]

just make one, it can't be too hard. Like take a piece of PVC that fits over it, cut in in half and run a bolt through it. Wah la!

[BendyStraw]

I had the exact same problem that you did.

Go to your local hardware store, and buy the longest, thinnest screw you can find. I think I used a 1/8" diameter screw, but you might just have to take the slider bar with you for comparison.

Next, take your plastic silver slider shell, which should be unscrewed and in two pieces. On each of them, drill a hole where the little plastic holders were for the stock slider bar. The hole should be in the exact same place as where the stock slider bar housing is.
After that, simply put the maverick back together, and slip the screw through the holes and in front of the little plunger nub that lets you pull it back. If you did it right, the screw should go right through both holes. Take a nut and screw it on the screw. Add a washer if you want, and dremel off the excess.

Voila! You just made a slider bar that works a lot better than the stock one. Too bad the Maverick still stinks. I can't help you with that.

Edited by BendyStraw, 26 September 2008 - 09:28 PM.

[Blue]

I had the exact same problem that you did.

Go to your local hardware store, and buy the longest, thinnest screw you can find. I think I used a 1/8" diameter screw, but you might just have to take the slider bar with you for comparison.

Next, take your plastic silver slider shell, which should be unscrewed and in two pieces. On each of them, drill a hole where the little plastic holders were for the stock slider bar. The hole should be in the exact same place as where the stock slider bar housing is.
After that, simply put the maverick back together, and slip the screw through the holes and in front of the little plunger nub that lets you pull it back. If you did it right, the screw should go right through both holes. Take a nut and screw it on the screw. Add a washer if you want, and dremel off the excess.

Voila! You just made a slider bar that works a lot better than the stock one. Too bad the Maverick still stinks. I can't help you with that.

He is missing half of the slider shell for some strange reason, this wont work.

[BendyStraw]

Whoa! How the crap did THAT tear out?!

[silentsnipe]

Whoa! How the crap did THAT tear out?!

It didn't tear out. One of two half's are lost.

[AssassinNF]

spend $8 on materials to rebuild cocking slide,

or...

spend $8 on a new maverick.

Guess what I'd do.

[Banshee]

God... Some of these people are just ignorant as to your problem. It made sense the first time you said it. You just need a new cock man... lol. Take a screw driver to wal-mart and steal half of a cock off another one. Or, scrap it for the spring, turret, and shell. Get a new one and turret mod it. Or better yet, do a night-mav. You don't need the other half.

Edited by Banshee, 27 September 2008 - 12:31 AM.

[TheNerfLoki]

You just need a new cock man.

I will probably get flamed for this but, That's what she said. You should just buy a new mav. You could turn the turrets into clips and save the spring. Or like assassin said spend 8 dollars on materials to fix it.
Edit:

I had the same problem, however just because I was impatient, I fixed it with a nail. I made the hole larger and pushed it through, bent the end and ground it down so it's not sharp anymore.

That is also what she said

Edited by TheNerfLoki, 29 September 2008 - 07:18 PM.

[Banshee]

You just need a new cock man.

I will probably get flamed for this but, That's what she said. You should just buy a new mav. You could turn the turrets into clips and save the spring. Or like assassin said spend 8 dollars on materials to fix it.

Haha!! That's not what she told me!!! Anyways, you pretty much just said what was already said, but whatever...

[Blue]

Mavs are 12 or 13 dollars at my walmart.

[aetherguy881]

I had the same problem, however just because I was impatient, I fixed it with a nail. I made the hole larger and pushed it through, bent the end and ground it down so it's not sharp anymore.

It worked, but far from my standards.

[Banshee]

I had the same problem, however just because I was impatient, I fixed it with a nail. I made the hole larger and pushed it through, bent the end and ground it down so it's not sharp anymore.

It worked, but far from my standards.

Again, you people are misunderstanding his problem... His slide isn't broken, half of it is MISSING.