#1
Posted 23 September 2008 - 06:56 PM
http://img255.images...nerfrf20bb9.png
I anyone out there has ever had this problem before can you please help me?
Thanks
-Hoceky
#3
Posted 23 September 2008 - 07:03 PM
There are 2 screws in that area that you can't see at first glance. So unscrew those or just saw off that piece and you should be good.
Do you mean on the underside of the black piece cause I got those already.
#4
Posted 23 September 2008 - 07:14 PM
There are 2 screws in that area that you can't see at first glance. So unscrew those or just saw off that piece and you should be good.
Do you mean on the underside of the black piece cause I got those already.
I don't know then. Sorry, That's what got it opened for me. So I don't know what to say.
Church... gotta soak up that Jesus!
NERFSTRONG #51
#5
Posted 23 September 2008 - 08:03 PM
#6
Posted 23 September 2008 - 08:05 PM
#7
Posted 23 September 2008 - 11:18 PM
I would recommend using zippo lighter fluid around the parts that are stuck.
Stay away from open flame and all that jazz.
The fluid will eat away at the adhesive and after a few times doing this. pry very slowly and it should just pop off.
be careful not to crack the Grey plastic.
I have done this many times without problem.
I don't feel the way I used to do.
I know its bad,
After what we had,
But I’m just not the angel you knew.
#8
Posted 24 September 2008 - 12:19 AM
"The moment you can no longer see the fun in running around like a little child is the moment you begin to die."
Roses are FF0000
Violets are 0000FF
ALL YOUR BASE ARE BELONG TO US
#9
Posted 26 September 2008 - 06:33 PM
#10
Posted 26 September 2008 - 07:23 PM
Where do you get your Zippo Lighter Fluid?
Around here, many grocery stores carry it, but it's on a shelf after the registers.
I'd recommend going to your grocery store and asking. But I also second badger's recommendation of Goo Gone as a substitute.
Thanks Just Some Bob, it helps alot.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users