9 replies to this topic

[Hoceky]

While I was trying to open my RF20, I got to the point where I unscrewed all the screws that I saw until they were out and when I tried to open it wouldn't open in this area:



http://img255.images...nerfrf20bb9.png





I anyone out there has ever had this problem before can you please help me?

Thanks



-Hoceky

[Icespartan 1114]

There are 2 screws in that area that you can't see at first glance. So unscrew those or just saw off that piece and you should be good.

[Hoceky]

There are 2 screws in that area that you can't see at first glance. So unscrew those or just saw off that piece and you should be good.

Do you mean on the underside of the black piece cause I got those already.

[Icespartan 1114]

There are 2 screws in that area that you can't see at first glance. So unscrew those or just saw off that piece and you should be good.

Do you mean on the underside of the black piece cause I got those already.

I don't know then. Sorry, That's what got it opened for me. So I don't know what to say.

[nerfer9]

I just cut mine off, I couldnt get it either.

[Banshee]

Most people just saw them off, but what you need to do is get a really sharp but thin knife and a couple flat head screw drivers and work your way down the crack where the black meets the silver. The "spoiler" is glued on to the rest of the body for whatever reason, you just have to cut through it on all 4 sides and the thing will pop right open. Also from my experience unless you're doing a paint job or some crazy RF20 overhaul, you don't even need to open the gun all the way to mod it.

[Forsaken angel24]

That part is glued onto the gun very well.
I would recommend using zippo lighter fluid around the parts that are stuck.
Stay away from open flame and all that jazz.
The fluid will eat away at the adhesive and after a few times doing this. pry very slowly and it should just pop off.
be careful not to crack the Grey plastic.

I have done this many times without problem.

[badger]

Goo Gone is another option as it is basically the exact same thing as lighter fluid, but has a citrus component that also helps it to act as a solvent.

[Hoceky]

Where do you get your Zippo Lighter Fluid?

[Hoceky]

Where do you get your Zippo Lighter Fluid?

Around here, many grocery stores carry it, but it's on a shelf after the registers.

I'd recommend going to your grocery store and asking. But I also second badger's recommendation of Goo Gone as a substitute.

Thanks Just Some Bob, it helps alot.