Pretty good integration dude, now integrate the red DTB with something red... like the Titan
I didn't even see this post by b00m13 while reading OfAllTheNerf's longshot Dtg integration thread until after I did this mod. I don't know if it's been done before, but if not, hoorah.
So lying around I had a screwed up red Dtg, and a boring old Pvc Titan. The Dtg had an old rotten rubber band inside it, and I had to open up the gun to get it out. After I opened it up, I looked at the empty spaces inside of it, and than at my Titan (Ahh Hah!). I decided to integrate the Dtg into the Titan where the hornet is supposed to go, since I destroyed all the shit that lets you fire the hornet anyway. I cut off the front handle of the Dtg completely, and the back handle until I hit the trigger. Than, it was just a matter of some adhesive.
The Dtg has standard mods, Ar removal, slight spring replacement. The Titan has a 1/2 inch Pvc coupler inside the original orange barrel, obviously allowing any 1/2 inch Pvc attachment to be used. Since the coupler is all the way down the orange barrel, right next to the air tank, the big black missle can still be fired. Just for the sphincter of it, I wrote "The Man" on the side with hotglue, than coloured it in with good ol' sharpie. On top of the gun is a gay little piece of Pvc my brother wanted to glue on as a scope, but it works worse than the original "scope" that the Titan had stock. Now, pictures with my new camera, I think they came out pretty well.
Here is the gun without the Pvc barrel-
The Dtg close-up-
The trigger of the Dtg-
The full gun, barrel attached-
1st personish view-
My aunt holding the gun-
A close-up on "The Man"
And lastly, a view down the barrel at the coupler-
The ranges for the Titan with stock micro darts (I dont really use stefans) are about 100-120 ft.
The Dtg with stock micro darts gets about 40-45 ft.
This gun is officially my new primary, I hoped you like it.