I made this head using a 1 1/4 x 48 wooden dowel and cutting it down. Then I drilled a hole through the middle of the wood.I then drilled a hole through the middle of the pluger shaft.After that I used a srew, it doesnt matter what size.Then srewed it through both of the holes. After that we used liquid epoxy to hold in the screw.Then lube the head and cover the bottom in E tape, and there you go.A working crossbow head if yours is ever to fall off.
Edited by BustaDartInYOurAss, 17 September 2008 - 07:40 PM.