Jump to content


Photo

Trigger Mods?


12 replies to this topic

#1 Nerfer16

Nerfer16

    Member

  • Members
  • 224 posts
  • Location:Washington

Posted 03 January 2004 - 10:47 AM

I have read Webbzterz bic pen mod, and don't really understand how it works.

Bic Pen Mod

Do you replace the trigger return spring, or is it a different spring? I have also heard of people just gluing part of a spring. What spring are they talking about? Should I do the bic pen mod?

Edited by Nerfer16, 03 January 2004 - 10:48 AM.

  • 0
Nerfer16 of the Seattle Tactical Nerf Team
Nerf on!

#2 Cadmond

Cadmond

    Member

  • Members
  • 113 posts

Posted 03 January 2004 - 12:24 PM

Basically, it allows you to pull the trigger harder than before. The spring on the triggers of most of the supermax guns is there to prevent you from firing an overpressurized gun.

But anyways, I used to wrap the springs in ribbon and then tape... you could just put hotglue there too, as you've said.

Just find a way to make the spring on the trigger a rigid thing, with no tendencies to compress (well.. a great deal,) and you're done.

Doesn't really reduce the trigger pull.. Just makes it more responsive.

Edited by Cadmond, 03 January 2004 - 12:24 PM.

  • 0

#3 Jappo

Jappo

    Member

  • Members
  • 149 posts
  • Location:North Vancouver, Canada

Posted 03 January 2004 - 06:29 PM

Ya, if you don't do a trigger fixer upper you will have a most difficult time pulling the trigger. You have to do a sorta combo of pumping the gun and firing it at the smae time to fire it. Anyways, for the 1500 just take a bit of hot glue and cover a bit of the spring in it. If it is still too loose add some more until you think its good enough. If you have the other 1500 and you cover the entire spring in glue, wehn you try to put it back into the trigger asembly it will not fit right and it will open the valve.
  • 0
"When life gives you lemons, you squish those lemons into the eyes of your enemies." - Jappo

#4 Nerfer16

Nerfer16

    Member

  • Members
  • 224 posts
  • Location:Washington

Posted 04 January 2004 - 09:42 AM

Is the spring we are talking about the air release spring? Also, why is the trigger going to become harder to pull if all I do to my AT2K is plug the end of the pump and add copper barrels?
  • 0
Nerfer16 of the Seattle Tactical Nerf Team
Nerf on!

#5 ShortShit

ShortShit

    Member

  • Members
  • 452 posts

Posted 04 January 2004 - 01:02 PM

I never found the need, nor had any issues with any of my AT's or SM series guns triggers once fully moded to do this trigger mod. I've just never had a hard time pullin the trigger...
  • 0
~SS

#6 Nerfer16

Nerfer16

    Member

  • Members
  • 224 posts
  • Location:Washington

Posted 04 January 2004 - 01:09 PM

That was what I was thinking.
  • 0
Nerfer16 of the Seattle Tactical Nerf Team
Nerf on!

#7 Wax

Wax

    Member

  • Members
  • 68 posts

Posted 04 January 2004 - 01:35 PM

All this does is make it so you don't have to compress the spring before the air is released. I don't think that it makes the trigger pull any easier. It just releases the air sooner on the trigger pull. Trigger pull is effectively the same, cause the trigger goes all the way back anyway. It's just easier this way. Also, theoretically, the air from the tank will be released more instantaneously. Anyway, instead of partially pulling back the pin at the beginning and leaking a little air, all the air gets released at the same point in time. Theoretically. It doesn't make a practical difference, but still. At least try putting in a bic pen, I atleast like the feel of it with it in.

Edited by Wax, 04 January 2004 - 01:35 PM.

  • 0
Wax in the Nerf universe, wax4213 everywhere else.

#8 Nerfer16

Nerfer16

    Member

  • Members
  • 224 posts
  • Location:Washington

Posted 04 January 2004 - 01:39 PM

What exactly feels different?
  • 0
Nerfer16 of the Seattle Tactical Nerf Team
Nerf on!

#9 Ares

Ares

    Member

  • Members
  • 166 posts

Posted 04 January 2004 - 01:58 PM

Listen:
ou oull hte rigger. the spring compresses. when the spring fully compresses, it pulls back he firing pin. this way, you pull it back immediately. no compressing. got it?
  • 0
The Greek God of War
Unseen

#10 Sylent Blade

Sylent Blade

    Member

  • Members
  • 270 posts
  • Location:Toronto

Posted 04 January 2004 - 03:18 PM

...Listen:
ou oull hte rigger...

What in the hell is that? Some new language for the drunk to understand? Come on, read your posts before posting, or edit them afterwards if you honestly couldn't catch that big of a screw up.

Onto the trigger. All this does is make air come out without pulling the trigger too hard. You can still pull the trigger down the whole way, but this little mod makes it so that you don't have to. It's personal preference. It does not increase performance or anything like that, it's like putting on a new trigger. You are altering response time, nothing more.
  • 0
Sylent Blade

http://cam-m.cjb.net

#11 rawray7

rawray7

    Member

  • Members
  • 549 posts

Posted 04 January 2004 - 07:49 PM

...Listen:
ou oull hte rigger...

What in the hell is that? Some new language for the drunk to understand? Come on, read your posts before posting, or edit them afterwards if you honestly couldn't catch that big of a screw up.

i'm sick of whatever you two have going on together, so to save us from this, i will translate . by looking at your keyboard, it's pretty easy to decifer "ou oull hte rigger" into "you pull the trigger". maybe his fingers are just offsest to the left a little.
  • 0
You, nerfboi, are the suckest gun. -neonerfer

#12 Nerfer16

Nerfer16

    Member

  • Members
  • 224 posts
  • Location:Washington

Posted 04 January 2004 - 08:07 PM

I just opened my AT2K, so it all makes sense now. Thanks for the help.
  • 0
Nerfer16 of the Seattle Tactical Nerf Team
Nerf on!

#13 Sylent Blade

Sylent Blade

    Member

  • Members
  • 270 posts
  • Location:Toronto

Posted 04 January 2004 - 09:03 PM

...Listen:
ou oull hte rigger...

What in the hell is that? Some new language for the drunk to understand? Come on, read your posts before posting, or edit them afterwards if you honestly couldn't catch that big of a screw up.

i'm sick of whatever you two have going on together, so to save us from this, i will translate . by looking at your keyboard, it's pretty easy to decifer "ou oull hte rigger" into "you pull the trigger". maybe his fingers are just offsest to the left a little.

Dude, that post was made before the "Update..." thread. It's over man, forget it. I'm not saying anything to the kid anymore. That post was more ribbing than anything, I only was trying to say "Read over your posts." I wasn't giving the guy hell.

Let's stay on topic.

Nerfer16, you figured it all out now? That's good, good luck with your mod.
  • 0
Sylent Blade

http://cam-m.cjb.net


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users