Items needed - Nitefinder, SSPB, and Dremel, I didn't use any hot glue but you can if you want.
Okay so here's the nitefinder.
![Posted Image](http://i281.photobucket.com/albums/kk234/NerfOnFier/Photo1-4.jpg)
Now for this integration mod the SSPB needs to be out of it's shell. I don't have a picture of a stock one so I got one from google.
![Posted Image](http://i281.photobucket.com/albums/kk234/NerfOnFier/nstrike-secretstrike.gif)
Open it up and the internals are just one piece.
![Posted Image](http://i281.photobucket.com/albums/kk234/NerfOnFier/Photo2-3.jpg)
Mine may look a bit different then yours, because I got mine off eBay and the detonator button was missing. I also did a barrel replacement. As some advice i'd use PETG on it, CPVC is way too tight, so i'm going to redo the barrel. Now open up your nitefinder, and dremel out the screws in the way of the SSPB, also dremel off the bottom. Sorry I can't outline it because my mac doesn't have MS paint.
![Posted Image](http://i281.photobucket.com/albums/kk234/NerfOnFier/Photo20.jpg)
Other side.
![Posted Image](http://i281.photobucket.com/albums/kk234/NerfOnFier/Photo19.jpg)
Now dremel off the front end of the NF to look like this.
![Posted Image](http://i281.photobucket.com/albums/kk234/NerfOnFier/Photo21.jpg)
Now try to fit the blaster in as well as you can, and there you go. Some shots of what it should look like.
![Posted Image](http://i281.photobucket.com/albums/kk234/NerfOnFier/Photo14-1.jpg)
![Posted Image](http://i281.photobucket.com/albums/kk234/NerfOnFier/Photo16.jpg)
And one last picture of the final product.
![Posted Image](http://i281.photobucket.com/albums/kk234/NerfOnFier/Photo11-1.jpg)
Hope it was easy to read and follow.
Questions? Comments? Flames?
Edited by NerfOnFier, 08 September 2008 - 12:52 PM.