Items needed - Nitefinder, SSPB, and Dremel, I didn't use any hot glue but you can if you want.
Okay so here's the nitefinder.
Now for this integration mod the SSPB needs to be out of it's shell. I don't have a picture of a stock one so I got one from google.
Open it up and the internals are just one piece.
Mine may look a bit different then yours, because I got mine off eBay and the detonator button was missing. I also did a barrel replacement. As some advice i'd use PETG on it, CPVC is way too tight, so i'm going to redo the barrel. Now open up your nitefinder, and dremel out the screws in the way of the SSPB, also dremel off the bottom. Sorry I can't outline it because my mac doesn't have MS paint.
Other side.
Now dremel off the front end of the NF to look like this.
Now try to fit the blaster in as well as you can, and there you go. Some shots of what it should look like.
And one last picture of the final product.
Hope it was easy to read and follow.
Questions? Comments? Flames?
Edited by NerfOnFier, 08 September 2008 - 12:52 PM.