i'm posting this really easy BBB mod today
First, you will need.....
1. A nerf Bid Bad Bow(duh)
2. 1 foot of 1/2 inch brass or copper (sold at ALL hardware stores)
3. A dremel(important!)
4. A hacksaw
First, open up your gun and take out the air restrictor and the stick that sits on top of the air restrictor. to open it up, only take out the screws in the front of the gun, before the pole that slides in and out of the gun while being cocked (primed).
put it back together and cut off a 1/2 inch of the top of the barrel outside the gun. Next, put your dremel inside the barrel and dremel it out so it's bigger. Now, force one end of the brass/copper, down the barrel about 2 inches, until its snug. If it doesn't go in, dremel more. My copper fits so well, it never wiggles, so i never needed hot glue. put a dart in the top of the copper barrel, cock and shoot! NOW YOUR DONE! unless you want to do what i did to make it more fun(it will take 5 min) i cut off a lot of the front handle and only left a little stub, so it is kinda like pump action. You grip the black ridged area, press the side of your hand against the handle nub and pump forward to cock!
Mine gets about 70 feet /w whistlers ( sonic micros)
and 55 with suctions
<a href="http://s482.photobuc...t=Photo133.jpg" target="_blank"><img src="http://i482.photobuc...8/Photo133.jpg" border="0" alt="bbb awesome mod"></a>
GO TRY THIS MOD!
Edited by kane34, 28 August 2008 - 12:15 AM.