well first i bought an over under cause it was only six bucks and I later broke the rod that cocks and releases the plunger. so out of boredom and another broken nitefinder ripoff I decided to mash them together.
so the basic overview on the over under...the plunger doesnt move the cylinder moves to force air out of it....
so i removed the cylinder and cut down the plunger so that the remainder of the plunger can act as a barrel is inline with the cylinder
since it's one of these trigger mechanism
______
\___|
i used a system of bent coat hangers and rubber bands to make the trigger.
and to make room for the cocking arm i just used wire strippers to make neat holes for the rod
EDIT: i almost for got the ranges...since i used a nitefinder ripoff...
-30
-32
-33
(plus if you actually use a nitefinder...this gun might be decent secondary)
p.s. I'll try to load up some pictures later
Edited by k9turrent, 23 August 2008 - 08:26 PM.
