Thats the gun compared to a Nitefinder. Stock ranges were about 7 ft.
Step #1: Open the gun up and snap off the original barrel
Step #2: Put electrical tape over the original barrel until your barrel of choice fits snugly.
Step #3: Sand down the area and cut down the cover that covers the tubing inside until it fits.
Step #4: I put lots of bands on and it destroyed the catch mechanism. I removed the broken part and replaced it with some popsicle stick and tacky glue.
Step #5: Put it back together and put screws where the blue tape is as this gun has way too many
Ranges: High forties with one giant rubber band. Its very hard to cock as there is very little to grab onto of the plunger handle.
Edited by Blue, 22 August 2008 - 07:46 PM.