Jump to content


Photo

Lock N Load Question


4 replies to this topic

#1 Kid Flash

Kid Flash

    Member

  • Members
  • 1,985 posts
  • Location:Amelia, Ohio

Posted 21 August 2008 - 08:16 PM

With the whole keyring thing I can't understand where most drill the hole or if its just gooped to the back... Any help is appreciated.
  • 0

#2 BlackFox

BlackFox

    Member

  • Members
  • 286 posts
  • Location:Gorst, Washington

Posted 21 August 2008 - 08:36 PM

Once you've taken the slide off, there should be a chevron shaped bend in the plunger rod. Most people just stick the ring there and glue it down.

Of course, there's always my way...

Posted Image
Posted Image

I can't really take credit for this, but I don't know who to give credit to. I just saw it on a sale thread and did it myself.
  • 0
"Until we meet in the place where there is no darkness"
-George Orwell, 1984
-----------

Think that piece is beyond repair? Think again!

#3 NerfMonkey

NerfMonkey

    Member

  • Members
  • 1,821 posts
  • Location:Woodbridge, VA
  • State:Virginia
  • Country:United States

Posted 21 August 2008 - 09:22 PM

I didn't use a keyring on mine, I used zip ties. But I drilled about a 1/8" hole maybe half an inch up from the back of the plunger rod and threaded them in there.
  • 0
SexD Warves

#4 Knud-Hansen

Knud-Hansen

    Member

  • Members
  • 58 posts
  • Location:Easton, MD

Posted 21 August 2008 - 11:33 PM

i recently did that to my lnl. i put the hole at the tip of the point on the rod, but it was through the thinner part of plastic, not the thick ridges. I hope that makes sense, tell me if it doesnt.
  • 0
[size=4][i]-Knud-

#5 Kid Flash

Kid Flash

    Member

  • Members
  • 1,985 posts
  • Location:Amelia, Ohio

Posted 21 August 2008 - 11:41 PM

Ok. Thanks to everyone that helped.
  • 0


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users