9 replies to this topic

[anon-dude]

Can anyone help me to take the stem out of the longshot barrel so it could fire stefans.

I did cartoons mod and dremeled out the air restricter so how am i suposed to get the srem out. Should I jus bend it till it breakes or what?

[AJZ]

You can look at Keef's mod, or just ban it out with a flat tip.

[Bomberman]

Well, there is more than taking out the Air Restrictor to make it fire stefans. The stefans are too short, and would slide around in the clip, and jam. Look at This mod, and it tells you how to make the LS fire stefans.

[anon-dude]

Well, there is more than taking out the Air Restrictor to make it fire stefans. The stefans are too short, and would slide around in the clip, and jam. Look at This mod, and it tells you how to make the LS fire stefans.

Thank you but i need to know how to take out the stem peice

[Bomberman]

Stem piece, as in, the little peg? You get that out, by taking out the Air Restrictor.Here is a standard modification for the Longshot by Carrtoon. Just Air Restrictor removal, and Spring Addition. When you remove the AR, then the peg comes out with it.

[slowguitarman]

Stem piece, as in, the little peg? You get that out, by taking out the Air Restrictor.Here is a standard modification for the Longshot by Carrtoon. Just Air Restrictor removal, and Spring Addition. When you remove the AR, then the peg comes out with it.

No. The peg does not come out with the AR. It has to be either drilled out or removed via keef's mod.

[Bomberman]

Stem piece, as in, the little peg? You get that out, by taking out the Air Restrictor.Here is a standard modification for the Longshot by Carrtoon. Just Air Restrictor removal, and Spring Addition. When you remove the AR, then the peg comes out with it.

No. The peg does not come out with the AR. It has to be either drilled out or removed via keef's mod.

I must be thinking of something else then, I have'nt seen the Longshot's internals in a while..

[Nerf Assaulter]

I would also like to know how to take out the peg.
This would leave a hole all the way into the plunger wouldn't it? (with the AR removed aswell)
I know about modding the clips to suit different sized darts.
Is there any way a dart could get sucked into the plunger part somehow?

[keef]

The stock seal isn't good enough to pull the dart into the plunger, but if your worried, you can put a dab of hot glue on the end of the bolt, where the dart goes in, to prevent them from getting sucked.

[anon-dude]

The stock seal isn't good enough to pull the dart into the plunger, but if your worried, you can put a dab of hot glue on the end of the bolt, where the dart goes in, to prevent them from getting sucked.

Thanks it worked