9 replies to this topic
#2
Posted 14 August 2008 - 06:04 PM
You can use CS's method of using metal washers and adhesive felt. I make mine with 2 BB's and hot glue.
TMC
#3
Posted 14 August 2008 - 06:19 PM
There's a Pinned Dartsmithing topic somewhere.
Edited by nat, 14 August 2008 - 06:23 PM.
If practice makes perfect and nobody is perfect, then why practice.
I pitty you foo! ~MR. T
I pitty you foo! ~MR. T
#4
Posted 14 August 2008 - 06:19 PM
I just started to make stefans
I make mine out of 3/0 fishing weights, hot glue, and Foam backer rod, I occasionally also add a little bit of foam on the end to make it safe
Or i take a stock dart and rip of the tip and make a CDTD's, There should be a wright up on them someone where on Nerfhaven
I make mine out of 3/0 fishing weights, hot glue, and Foam backer rod, I occasionally also add a little bit of foam on the end to make it safe
Or i take a stock dart and rip of the tip and make a CDTD's, There should be a wright up on them someone where on Nerfhaven
Edited by Icespartan_1114, 14 August 2008 - 06:21 PM.
I won't be there til about 1-2...
Church... gotta soak up that Jesus!
Church... gotta soak up that Jesus!
NERFSTRONG #51
#5
Posted 14 August 2008 - 07:22 PM
Instead of making a whole new topic on the subject, Try this http://nerfhaven.com...?showtopic=4646
#6
Posted 14 August 2008 - 09:48 PM
I use gray FBR, sorry I forgot the brand's name, clasic hairdryer and pillowcase to make it straight, one copper BB for weight, a dome of hotglue at the tip, and used the hotglue gun to burn a hole in the back. Hoped this helped.
All he's got to do is roll it around in his fingers to start it getting hard and put in in the hole.
#7
Posted 14 August 2008 - 11:11 PM
I USALLY USE SLUG STYLE BUT ILL ADMIT I LIKE THE BB ONES
¤ø„¸¨°º¤ø„¸¸„ø¤º°¨¸„ø¤º°¨
¨°º¤ø„¸Van Halen ¸„ø¤º°¨
¸„ø¤º°¨ ~~~~ ROCKS!!~~~~``°º¤ø„¸
¸„ø¤º°¨¸„ø¤º°¨¨°º¤ø„¸¨°º¤ø„ 4EVER
Copy and paste this in your signature
if you are playing football this fall.
¨°º¤ø„¸Van Halen ¸„ø¤º°¨
¸„ø¤º°¨ ~~~~ ROCKS!!~~~~``°º¤ø„¸
¸„ø¤º°¨¸„ø¤º°¨¨°º¤ø„¸¨°º¤ø„ 4EVER
Copy and paste this in your signature
if you are playing football this fall.
#8
Posted 14 August 2008 - 11:16 PM
I USALLY YELL EVRYTHING ON TEH INTERNETS!!
(Tannman, check the CoC, part of it states that capitalization should be used correctly)
My stefans are 1.5 inch, grey Caulk Sav'r, 3/0 splitshot, pillow case and hair dryer straightened, small dome of hotglue on top, no hole.
(Tannman, check the CoC, part of it states that capitalization should be used correctly)
My stefans are 1.5 inch, grey Caulk Sav'r, 3/0 splitshot, pillow case and hair dryer straightened, small dome of hotglue on top, no hole.
Animus GmbH My Custom Nerf Props and Paintjobs
#9
Posted 15 August 2008 - 08:51 AM
I use gray caulk saver (the guy at the hardware store told me it was the same thing as FBR). Then I put them in a pillow case in the dryer for 10 minutes and hot glue a #8 washer on the tip and burn a hole in the back. They do sting though, because I didn't cover the washer with anything, so I'll probably do what Icespartan did and put a little foam on the front.
WARNING: THIS SIGNATURE IS BRUTALLY OVERUSED!
#10
Posted 15 August 2008 - 10:55 AM
I use the standard 'FBR with a size 7 fishing' weight stefans. If I find the right kind of washer I will try some of those stefans as well.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users