3 replies to this topic

[Norther of Heaven]

I've finally got a good Big Bad Bow mod going but I have to re-straighten the barrel constantly. Has anyone thought up a good way to keep it straight without glueing the barrel post to the inside of the case? And yes I've checked the directory for this. And searched.

Edited by Norther_of_Heaven, 13 August 2008 - 02:27 AM.

[CrazyIvan VI]

I've finally got a good Big Bad Bow mod going but I have to re-straighten the barrel constantly. Has anyone thought up a good way to keep it straight without glueing the barrel post to the inside of the case? And yes I've checked the directory for this. And searched.

I also had this problem when I modded my BBB. It was probably because I sawed the stock barrel all the way off...

But anyways, I fixed it simply by wrapping a couple layers of E-Tape around where the barrel meets the case, keeps it nice and snug.

[Norther of Heaven]

Thanks for the suggestion, good idea.

[sub280]

Well, ive tried several ways, but if your useing a coupler, heres what i did.

Get about 1 1/2" of cpvc and put it in the coupler and shove down the barrel. (i sawed my stock barrel off)
then hot glue/epoxy it from the inside. It takes up dead space and keeps ur coupler straight and reinforces it.
Plus u can still remove the barrel!

Hope i helped, sub280 ;]