All you need is a Longshot, screwdriver, and pipe cutters!
Sorry I don't have a few pics, its pretty easy to understand though, but heres CS's LS internal pic.
First, tear that shit open and get to the plunger tube and boltsled.
You can try taking off the boltsled (its pinned in) but the one's I've seen recently have been really tight or glued.
Then, take out the plunger. Just so you have the bolt and plunger tube (which is one piece, for now ).
Now, you only have like, 2 mm of room to cut the bolt from the line in the photo. You can cut anywhere to the left of the deep groove, to the other line.
Just tighten the cutters a little, and cut until the front of the bolt falls off.
Now you can take out the huge AR and drill the peg out.
Now, you can just super glue it back in when your done, but if your putting in a stronger spring, you may want to try an epoxy of some sort.
The best part about this is how its so damn easy! I do NOT recommend a dremel, or saw of ANY sort for this. Only pipe cutters will work, otherwise it won't be the 2 pieces that it should be.
Hope you all like this, and hope you all use it. I JUST thought of it right as I drilled out my AR's, so thats why I'm missing a few pics.
Edited by keef, 11 August 2008 - 10:17 PM.